Line 1: |
Line 1: |
| __NOTOC__ | | __NOTOC__ |
| Gravel diaphragms are simply gravel filled trenches which act as inlet structures by redistributing concentrated flow to sheet flow: reducing the erosive power of the water and promoting infiltration. They also act as a pretreatment by settling out sediment particles before they reach any downstream structure or practice. | | Gravel diaphragms are simply gravel filled trenches which act as inlet structures by redistributing concentrated flow to sheet flow: reducing the erosive power of the water and promoting infiltration. They also act as a pretreatment by settling out sediment particles before they reach any downstream structure or practice. |
− | | + | {{textbox|Gravel diaphragms are ideal for distributing flow and providing pretreatment for |
− | {{TextBox|1=Gravel diaphragms are ideal for distributing flow and providing pretreatment for | |
| *[[Bioretention cells]] | | *[[Bioretention cells]] |
| *[[Bioswales]] | | *[[Bioswales]] |
| *[[Enhanced grass swales]] | | *[[Enhanced grass swales]] |
| *[[Vegetated filter strips]]}} | | *[[Vegetated filter strips]]}} |
− | ----
| + | |
− | ===Planning considerations===
| + | ==Planning considerations== |
| *Diaphragms can be designed along curves as readily as straight lines, | | *Diaphragms can be designed along curves as readily as straight lines, |
| *As they are not a conveyance practice, they should be designed along a single contour line, promoting the level spreading function, | | *As they are not a conveyance practice, they should be designed along a single contour line, promoting the level spreading function, |
| *Flow should be directed into the device laterally, | | *Flow should be directed into the device laterally, |
− | ----
| + | |
− | ===Design===
| + | ==Design== |
| *Where flow comes off an impervious surface, a drop of 75 mm or more to the surface level of the diaphragm is recommended, | | *Where flow comes off an impervious surface, a drop of 75 mm or more to the surface level of the diaphragm is recommended, |
| *Typical dimensions for the trench excavation are 300 mm deep and 600 mm wide. The trench may be any length, | | *Typical dimensions for the trench excavation are 300 mm deep and 600 mm wide. The trench may be any length, |
| *The trench should be lined with geotextile before filling with gravel, | | *The trench should be lined with geotextile before filling with gravel, |
| *River rock or decorative aggregate may be included in a layer at the top of the gravel fill, for aesthetic value. | | *River rock or decorative aggregate may be included in a layer at the top of the gravel fill, for aesthetic value. |
− | ----
| + | |
− | ===Materials===
| + | ==Materials== |
| <h4>Gravel</h4> | | <h4>Gravel</h4> |
| {{:Pea gravel}} | | {{:Pea gravel}} |
| <h4>Geotextile</h4> | | <h4>Geotextile</h4> |
| {{:Geotextiles}} | | {{:Geotextiles}} |
− | ----
| + | |
− | ===External Resources===
| + | ==External Resources== |
| *[http://vwrrc.vt.edu/swc/april_22_2010_update/DCR_BMP_Spec_No_2_SHEET_FLOW_Final_Draft_v1-8_04132010.htm VIRGINIA DCR STORMWATER DESIGN SPECIFICATION No. 2] | | *[http://vwrrc.vt.edu/swc/april_22_2010_update/DCR_BMP_Spec_No_2_SHEET_FLOW_Final_Draft_v1-8_04132010.htm VIRGINIA DCR STORMWATER DESIGN SPECIFICATION No. 2] |
| *[https://directives.sc.egov.usda.gov/OpenNonWebContent.aspx?content=17751.wba National Engineering Handbook Part 628 Dams Chapter 45 Filter Diaphragms] | | *[https://directives.sc.egov.usda.gov/OpenNonWebContent.aspx?content=17751.wba National Engineering Handbook Part 628 Dams Chapter 45 Filter Diaphragms] |
| | | |
| [[category: pretreatment]] | | [[category: pretreatment]] |