Difference between revisions of "Infiltration trenches"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
Line 1: Line 1:
 
This article is about underground systems which distribute concentrated flow along a level, linear facility to promote infiltration to native soils. <br>
 
This article is about underground systems which distribute concentrated flow along a level, linear facility to promote infiltration to native soils. <br>
For a similar structure, which differs in being designed to receive excess flow and convey it, whilst promoting infiltration to native soils, see [[exfiltration trenches]].
+
For a similar structure, which differs in being designed to receive excess flow and convey it, while promoting infiltration to native soils, see [[exfiltration trenches]].
 
[[File:Kortright trench.PNG|thumb|The infiltration trench at Kortright is topped with [[filter fabric]] and decorative [[stone]], both of which provide some [[pretreatment]] and can easily be removed and replaced as an occasional maintenance task. For more details click [https://sustainabletechnologies.ca/app/uploads/2016/08/BioVSTrench_TechBrief__July2015.pdf here] ]]   
 
[[File:Kortright trench.PNG|thumb|The infiltration trench at Kortright is topped with [[filter fabric]] and decorative [[stone]], both of which provide some [[pretreatment]] and can easily be removed and replaced as an occasional maintenance task. For more details click [https://sustainabletechnologies.ca/app/uploads/2016/08/BioVSTrench_TechBrief__July2015.pdf here] ]]   
 
{{TOClimit|2}}
 
{{TOClimit|2}}

Revision as of 16:19, 27 July 2020

This article is about underground systems which distribute concentrated flow along a level, linear facility to promote infiltration to native soils.
For a similar structure, which differs in being designed to receive excess flow and convey it, while promoting infiltration to native soils, see exfiltration trenches.

The infiltration trench at Kortright is topped with filter fabric and decorative stone, both of which provide some pretreatment and can easily be removed and replaced as an occasional maintenance task. For more details click here

Overview[edit]

As their name suggests infiltration trenches work primarily to infiltrate and convey stormwater. They are an underground facility and are excellently suited to connecting other components in the treatment train.

Infiltration trenches are an ideal technology for:

  • Installing below any type of surface or landscape
  • Balancing the requirements to infiltrate excess stormwater whilst conveying excess

The fundamental components of an infiltration trench are:

Planning considerations[edit]

As shown in the illustration above a surface inlet to an infiltration trench may simply be a channel of decorative stone supported by a geotextile. So that at grade it may be indistinguishable from a gravel diaphragm. In function though, the decorative surface course of the infiltration trench needs to remain free-draining down into the trench, whereas the gravel diaphragm is designed to spill over onto adjacent land, leaving sediment behind in the gravel or stone channel.

Design[edit]

Sizing[edit]

Infiltration: Sizing and modeling

  • Virginia up to 10' (3 m) deep. [1]
  • Minnesota up to 12' (3.6 m) deep. [2]
  • "...not normally be deeper than 3 to 4 m in order to maximise the length of the flow path to the water table through the unsaturated zone." [3]
  • There is a cost implication with digging deeper practices, trench boxes may be required to retain the side walls during construction.

Materials[edit]

Aggregate[edit]

Note the uniform size and angularity of this clear stone sample. Note also that the fragments all appear to have a film of fine particles adhering; this material would be improved by being washed prior to use.

This article gives recommendations for aggregate to be used to store water for infiltration. This is usually called 'clear stone' at aggregate yards.

To see an analysis of Ontario Standard Specifications for granular materials, see OPSS aggregates.

For advice on decorative surface aggregates see Stone


Gravel used for underdrains in bioretention, infiltration trenches and chambers, and exfiltration trenches should be 20 or 50 mm, uniformly-graded, clean (maximum wash loss of 0.5%), crushed angular stone that has a porosity of 0.4[4].

The clean wash to prevent rapid accumulation of fines from the aggregate particles in the base of the reservoir. The uniform grading and the angularity are important to maintain pore throats and clear voids between particles. (i.e. achieve the porosity). Porosity and permeability are directly influenced by the size, gradation and angularity of the particles [5]. See jar test for on-site verification testing protocols.

Gravel with structural requirements should also meet the following criteria:

  • Minimum durability index of 35
  • Maximum abrasion of 10% for 100 revolutions and maximum of 50% for 500 revolutions

Standard specifications for the gradation of aggregates are maintained by ASTM D2940


Perforated Pipe[edit]

Pipes are available with perforations on just one side, these should be situated on the lower half of the pipe. Pipes with 360° perforations should have a strip of geotextile or membrane placed over the pipe to reduce the migration of fines from overlying media.

Perforated pipes are a common component of underdrains used in bioretention, permeable pavements, infiltration trenches and exfiltration systems.

Pipes should be manufactured in conformity with the latest standards by the Canadian Standards Association (CSA) or ASTM International.

  • Perforated pipes should be continuously perforated, smooth interior HDPE or PVC.
    • Wherever possible pipes should be ≥200 mm internal diameter to reduce potential of freezing and to facilitate push camera inspections and cleaning with jet nozzle equipment.
    • Smooth interior facilitates inspection and maintenance activities; internal corrugations can cause cameras or hydrojetting apparatus to become snagged.
    • A perforated pipe with many rectangular slots has better drainage characteristics than a pipe with similar open area provided by fewer circular holes [6].
  • Non-perforated pipes should be used for conveyance of stormwater to and from the facility, including overflow. It is good practice to extend the solid pipe approximately 300 mm within the reservoir or practice to reduce the potential for native soil migration into the pipe.

See also: Flow through perforated pipe


Construction[edit]

Gallery[edit]


  1. Viriginia Department of Transport. (2010). VDOT BMP Design Manual of Practice. Retrieved March 15, 2018, from http://www.virginiadot.org/business/resources/LocDes/BMP_Design-Manual/Chapter_8_Infiltration_Trench.pdf
  2. Design criteria for Infiltration trench. (2016, September 21). Minnesota Stormwater Manual, . Retrieved 13:25, April 4, 2018 from https://stormwater.pca.state.mn.us/index.php?title=Design_criteria_for_Infiltration_trench&oldid=28702.
  3. Design of soakaways (2015) www.tiipublications.ie/library/DN-DNG-03072-01.pdf
  4. Porosity of Structural Backfill, Tech Sheet #1, Stormtech, Nov 2012, http://www.stormtech.com/download_files/pdf/techsheet1.pdf accessed 16 October 2017
  5. 5.0 5.1 5.2 Judge, Aaron, "Measurement of the Hydraulic Conductivity of Gravels Using a Laboratory Permeameter and Silty Sands Using Field Testing with Observation Wells" (2013). Dissertations. 746. http://scholarworks.umass.edu/open_access_dissertations/746
  6. Hazenberg, G., and U. S. Panu (1991), Theoretical analysis of flow rate into perforated drain tubes, Water Resour. Res., 27(7), 1411–1418, doi:10.1029/91WR00779.