Understanding rainfall statistics

From LID SWM Planning and Design Guide
Jump to: navigation, search

This article presents a step-wise approach to give design practitioners an idea of where figures like the 90th percentile event and concepts like 5 mm retention = 50% annual water balanceThe accounting of inflow and outflow of water in a system according to the components of the hydrologic cycle. target = 0.5 runoffThat potion of the water precipitated onto a catchment area, which flows as surface discharge from the catchment area past a specified point.Water from rain, snow melt, or irrigation that flows over the land surface. coefficient come from.

The Ontario Ministry of the EnvironmentRefers to the conditions in which an organism lives and survives or the conditions in which an organism resides. These conditions can be described as aspects of a “physical”, “social” or an “economic” environment, depending on the perspective perceived by the observer. Conservation and Parks, and other regulatory agencies perform much more rigorous statistical analyses than the example presented, and their resultant stormwater management targets vary accordingly.

Example: City of Barrie, using only years 2015 to 2017

Daily rainfall records from BARRIE LANDFILL weather station were obtained for the years 2015 - 2017, from the Environment Canada historical data record.

The example will only consider rainstorm events, although the records also contain data for 'precipitationAny form of rain or snow.'. PrecipitationAny form of rain or snow. is more useful if snowfall were also of interest to the analyst. (For example, if the analyst wished to calculate annual retention or runoffThat potion of the water precipitated onto a catchment area, which flows as surface discharge from the catchment area past a specified point.Water from rain, snow melt, or irrigation that flows over the land surface. from a facility.)

This graph shows the data as a time series:

Barrie time series.jpg

The number of times each depth of storm occured can be counted and grouped like this:

Picture1.jpg

These same data can be fitted to a single equation which would then allow predictions to be made. In this example an exponential distribution function has been selected and an online tool used to find the fitting parameter 'λ'.

\(f\left(x,\lambda\right)=\lambda e^{-\lambda x}\)

The fitting found λ to be 0.11. When the equation is plotted, the graph looks like this:

Barrie prob.jpg

But the frequencies of the different rainstorms aren't very easy to understand like this.

The cumulative distribution function uses the same λ and is a more useful way to read the data.

\(F\left(x,\lambda\right)=1- e^{-\lambda x}\)

Plotted, it looks like this:

Barrie cumulative.jpg

The 90th percentile event is the rainstorm for which 90% of all rainstorms are this depth or less. In this example, using a very limited data set it was found to be 20 mm.

i.e. 90% of all storms ≤ 20 mm.

Storms of ≤ 5 mm represent 40% of the total in this example.

See also

Drainage time