8,255
edits
Changes
Jump to navigation
Jump to search
Line 12:
Line 12: − + Line 35:
Line 35: − /*Careful catchment selection means that the runoff coefficient, for a rainstorm event (C<sub>vol, E</sub>) should be 0.9 or greater.+
Rainwater harvesting: Sizing and modeling (view source)
Revision as of 01:08, 12 August 2017
, 6 years ago→Simple
}}}}
}}}}
Filter efficiency (e) can be reasonably estimated as 0.9 pending manufacturer’s information.
Filter efficiency (e) can be reasonably estimated as 0.9 pending manufacturer’s information.<br>
In a study of three sites in Ontario, STEP found the annual C<sub>vol, A</sub> of the rooftops to be around 0.8 [http://www.sustainabletechnologies.ca/wp/home/urban-runoff-green-infrastructure/low-impact-development/rainwater-harvesting/performance-evaluation-of-rainwater-harvesting-systems-toronto-ontario/]. This figure includes losses to evaporation, snow being blown off the roof, and number of overflow events.<br>
In a study of three sites in Ontario, STEP found the annual C<sub>vol, A</sub> of the rooftops to be around 0.8 [http://www.sustainabletechnologies.ca/wp/home/urban-runoff-green-infrastructure/low-impact-development/rainwater-harvesting/performance-evaluation-of-rainwater-harvesting-systems-toronto-ontario/]. This figure includes losses to evaporation, snow being blown off the roof, and number of overflow events.<br>
*e = The efficiency of the pre-storage filter.}}}}
*e = The efficiency of the pre-storage filter.}}}}
*Careful catchment selection means that the runoff coefficient, for a rainstorm event (C<sub>vol, E</sub>) should be 0.9 or greater.
When 0.33 < Y<sub>0.05</sub>/ D<sub>0.05</sub>< 0.7, the total storage required can be estimated by adding Y<sub>0.05</sub>:
When 0.33 < Y<sub>0.05</sub>/ D<sub>0.05</sub>< 0.7, the total storage required can be estimated by adding Y<sub>0.05</sub>: