Changes

====Sediment controls====

====Sediment controls====

[[File:Screenshot 2025-11-12 164017.png|400px|thumb|Sediment fence posts should be no more than 2 m apart.​ Structural fencing support (page wire) or 10 by 10 wooden posts are preferred. The end runs of any perimeter controls should extend a sufficient distance up slope to prevent flow from going around the control measure.​​]]

[[File:Screenshot 2025-11-12 164017.png|400px|thumb|Sediment fence posts should be no more than 2 m apart.​ Structural fencing support (page wire) or 10 by 10 wooden posts are preferred. The end runs of any perimeter controls should extend a sufficient distance up slope to prevent flow from going around the control measure.​​]]

[[File:Screenshot 2025-11-12 174756.png|400px|thumb|right|If a sediment/dewatering bag is being used, ensure that it is in an appropriate location,

[[File:Screenshot 2025-11-12 174756.png|400px|thumb|right|If a sediment/dewatering bag is being used, ensure that it is in an appropriate location,

changed when required, the area underneath is stabilized, and that there is a stable flow path from the bag to the receiver.​ Monitor to ensure discharge is clean and no

changed when required, the area underneath is stabilized, and that there is a stable flow path from the bag to the receiver.​ Monitor to ensure discharge is clean and no

erosion is occurring.​]]

erosion is occurring.​]]

[[File:Screenshot 2025-11-13 112507.png|400px|thumb|right|Protection, such as filter socks, should be installed around inlets. Filter socks should be staked whenever possible to prevent shifting, or reinforced with a board.]]

[[File:Screenshot 2025-11-13 112507.png|400px|thumb|right|Protection, such as filter socks, should be installed around inlets. Filter socks should be staked whenever possible to prevent shifting, or reinforced with a board.]]