8,255
edits
Changes
Jump to navigation
Jump to search
Line 2:
Line 2: − + + + + + + + + +
Rainwater harvesting: Sizing and modeling (view source)
Revision as of 20:34, 6 June 2017
, 7 years ago→Rapid
{{TOClimit|2}}
{{TOClimit|2}}
===Rapid===
===Rapid===
Total cistern volume can be estimated by multiplying the depth of design storm....
<p>Total cistern volume can be estimated by multiplying the depth of design storm the catchment area. 1 mm of rain over 1 m<sup>2</sup> results in 1 L of runoff.
For example, the 90th percentile event in Barrie is 26 mm, so every 1 m<sup>2</sup> of rooftop will generate 26 L during this storm event. A 2000 m<sup>2</sup> building would generate 54,000 L of runoff. </p>
The designers have three choices:-
<ol>
<li>Construct a suitably sized concrete vault underground to capture all of the water</li>
<li>Alter the slope of the roof to create two or more catchments, the smaller catchments may be diverted to plastic or fiberglass cisterns</li>
<li>Design 1. or 2. Slightly undersized for this storm, but with additional capacity in an infiltration system to capture overflow. Examples include [[Bioretention Cells|bioretention cells]] or [[Infiltration Chambers|infiltration chambers]]. </li>
</ol>
</p>
</div>
</div>
<div class="col-md-4">
<div class="col-md-4">