Stormwater Tree Trenches: Maintenance

The following maintenance procedures and preventative measures should be incorporated into a maintenance plan:

An example of a stormwater tree trench system located within the existing street median, Mississauga, ON. Central Parkway retrofit. (Source: STEP, 2016).

• Tree Maintenance: Inspection and maintenance of all municipally-owned trees shall be conducted by municipal staff or its contractors after the warranty period of the construction contract. This work may include, frequent watering and fertilizing as trees begin to establish themselves in the feature, this is especially important during drought-like conditions. Proper tree pruning is also important throughout the life of the tree, but especially during the early life stages of trees to help limit the potential for detrimental deformations or growth habits. This will help reduce costs as the tree matures and attempts at correcting improper growth, or replacement of the tree entirely becomes more costly. Staff involved in inspection and maintenance of these features should be experienced with the designated planting plan, plant species identification, and weed removal and control methodologies enacted by the municipality.

• Planting Beds: Remove invasive species and weeds, trash and organic debris. Ensure to refresh mulch to retain complete coverage and add mulch to correct grade inconsistencies in tree beds flush with the sidewalk (minimum depth of 50 mm to a maximum of 100 mm and an minimum of 40 mm from the base of the tree in the feature). To be completed every 3 - 6 months.

• Pavement / Covered Trenches: Maintain tree surroundings and grates and ensure that the grates themselves are level with the sidewalk, as needed. After 3 - 5 years, dependent upon tree growth, remove inner ring to allow tree to mature and grow unimpeded.

• Inlets: This may include trench drains, curb cuts/openings and pavement edges, all obstructions of trash and debris should be removed twice a year. Any plants within trench drains themselves or 100mm of the entrance or exit of said drains shall be removed twice a year.

• Irrigation System: Maintenance or replacement of these system components shall take place as required, meanwhile winterizing watering systems to prevent damage shall take place twice a year (in the Spring and Fall). To limit excess salt impacts in the feature flushing and/or leaching excess sodium in the soil should be done annually in the spring by fully saturating the passive irrigation system with water.

• Grid Pavers: Paver or grid systems that have been planted with grass should be mowed regularly and the clippings should be removed. Water and fertilize as needed. .

• Soil / Growing Medium: Testing of soil to determine its structure, organic matter and confirm microbial level counts are satisfactory for selected vegetation will take place at installation and during performance diagnostic intervals. Whereas organic fertilizing and soil amendments recommended by testing will be done on an as-need basis.

• Soil Cells: As these structural components for stormwater management are installed at the beginning stages of this BMP feature there are no routine maintenance tasks expected during the stated design life life of the feature. If there are please refer to the manufacturer and their warranty process. For replacement of components contact the soil cell manufacturer.

• Underdrain: Flush out accumulated sediment with a hose or for more intensive clogging a pressure washer, done annually.

• Vegetation: Perform routine vegetation maintenance tasks (i.e., watering, weeding, trimming) at recommended frequencies (weekly or as required to maintain optimal soil moisture) over the two-year establishment period for the plantings; and replace plants that don't survive the initial establishment period (assumes 10% and 20% of plant material does not survive the first year for Minimum Recommended and High Frequency maintenance scenarios, respectively). Replacement of dead/diseased plants once established shall take place every 6 months or yearly dependent upon the minimum of 80% vegetation coverage. Remove any undesirable vegetation (invasive, seedlings etc.) every 3 - 6 months, and ensure proper pruning, cut back and thinning of shrubs and plants every year.

For more detailed guidance, refer to STEP's Low Impact Development Stormwater Management Practice Inspection and Maintenance Guide and The City of Toronto's, Design Criteria for Green Infrastructure in the Right-of-Way documents, both of which can be accessed here and here.

Sustainable Technologies Evaluation Program

a top dressing over vegetation beds that provides suppresses weeds and helps retain soil moisture in bioretention cells, stormwater planters and dry swales.

Human application of water to agricultural or recreational land for watering purposes. City of Toronto Wet Weather Flow Management November 2006 47

Human application of water to agricultural or recreational land for watering purposes. City of Toronto Wet Weather Flow Management November 2006 47

Best management practice. State of the art methods or techniques used to manage the quantity and improve the quality of wet weather flow. BMPs include: source, conveyance and end-of-pipe controls.

A perforated pipe used to assist the draining of soils.

Soil, sand and minerals washed from land into water, usually after rain. They pile up in reservoirs, rivers and harbors, destroying fish-nesting areas and holes of water animals and cloud the water so that needed sunlight might not reach aquatic plans. Careless farming, mining and building activities will expose sediment materials, allowing them to be washed off the land after rainfalls.

Low impact development is a stormwater management and land development strategy applied at the parcel and subdivision scale that emphasizes conservation and use of on-site natural features integrated with engineered, small scale hydrologic controls to more closely mimic pre-development hydrologic functions.

A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting.