2,121
edits
Changes
Jump to navigation
Jump to search
Line 12:
Line 12: − + + + + + − +
→Testing and Verification
==Testing and Verification==
==Testing and Verification==
Several agencies across Canada require [https://etvcanada.ca/home/verify-your-technology/ ISO 14034 Environmental Technology Verification (ETV)] as a condition of technology acceptance. For OGS, the ISO 14034 verification process in Canada consists of two parts:
Several agencies across Canada require [https://etvcanada.ca/home/protocols-and-procedures/ ISO 14034 Environmental Technology Verification (ETV)] as a condition of technology acceptance.<br>
<small> ('''Note''': when visiting the above link click on the "''Other''" tab on the page to view Specific Testing Protocols for OGS)</small>.
<br>
For OGS, the ISO 14034 verification process in Canada consists of two parts:
# Third party laboratory testing of MTDs in accordance with the [https://sustainabletechnologies.ca/home/urban-runoff-green-infrastructure/conventional-stormwater-management/hydrodynamic-separators/procedure-for-laboratory-testing-of-oil-grit-separators/ TRCA’s Procedure for Laboratory Testing of Oil Grit Separators] and associated bulletins, and
# Third party laboratory testing of MTDs in accordance with the [https://sustainabletechnologies.ca/home/urban-runoff-green-infrastructure/conventional-stormwater-management/hydrodynamic-separators/procedure-for-laboratory-testing-of-oil-grit-separators/ TRCA’s Procedure for Laboratory Testing of Oil Grit Separators] and associated bulletins, and
# Third party verification of the test in accordance with the [https://etvcanada.ca/home/verify-your-technology/ISO 14034 ETV standard].
# Third party verification of the test in accordance with the [https://etvcanada.ca/home/verify-your-technology/ISO 14034 ETV standard].
The ISO 14034 verification process is currently administered by [https://etvcanada.ca/home/contact/ Globe Performance Solutions and Verify Global]. Completed ISO 14034 verification statements for OGS are posted to the [https://etvcanada.ca/wp-content/uploads/2020/11/ISO-14034-Verification-Statement-_Stormceptor_EF-EFO_2020-2023.pdf former Canadian ETV website, here].
The ISO 14034 verification process is currently administered by [https://etvcanada.ca/home/contact/ Globe Performance Solutions and Verify Global]. Completed ISO 14034 verification statements for OGS are posted to the [https://etvcanada.ca/home/verify-your-technology/current-verified-technologies/ website, here].
Note that ISO 14034 verification is a necessary, but not sufficient condition for approval agencies using the ISO/ETV process for technology acceptance. The technology must also be classified as an Oil Grit Separator (i.e. not include a filter) for the [https://sustainabletechnologies.ca/app/uploads/2013/06/ETV-OGS-Procedure_final_revised-June_2014.pdf Procedure for Laboratory Testing of OGS] to have been properly applied. [https://etvcanada.ca/wp-content/uploads/2022/03/ETV-Bulletin-CETV-2022-02-0001_final.pdf This ETV Bulletin] helps to provide clarification on this requirement: See table below for a list of current ISO 14034 verified OGS MTDs.
Note that ISO 14034 verification is a necessary, but not sufficient condition for approval agencies using the ISO/ETV process for technology acceptance. The technology must also be classified as an Oil Grit Separator (i.e. not include a filter) for the [https://sustainabletechnologies.ca/app/uploads/2013/06/ETV-OGS-Procedure_final_revised-June_2014.pdf Procedure for Laboratory Testing of OGS] to have been properly applied. [https://etvcanada.ca/wp-content/uploads/2022/03/ETV-Bulletin-CETV-2022-02-0001_final.pdf This ETV Bulletin] helps to provide clarification on this requirement: See table below for a list of current ISO 14034 verified OGS MTDs.