Nutrients

The profile view of a bioretention feature with associated zones and the processes used to remove excess nitrogen and phosphorous inputs out of incoming overland water from agricultural lands (Photo Source: Osman, et al. 2022)

Overview

Nutrients are an essential part of life, however excess amounts of them can harm the environment. Anthropogenic activities can lead to such excessive amount of nutrients in runoff and cause degradation of receiving waters. Phosphorus and Nitrogen are the main nutrients of concern in stormwater runoff. This page provides information on the sources of nutrients, the issues caused by their excess amounts, and strategies to manage them.

Nutrient pollution

The primary concern with excess amounts of nutrients is eutrophication (U.S. EPA 1999). Eutrophication is the process of excessive algae growth due to abundance of nutrients that can cause hypoxic condition in water. Excessive algal growth can cover the surface of water and prevent light penetration. Without light, the desirable aquatic plants die off. The eventual decay of aquatic plants and algae, consumes the dissolved oxygen in the water and creates hypoxic condition that can kill fish and other aquatic animals.

Nutrient pollution has been noted as a critical environmental, public health, and economic concern in Canada, Great Lakes, Lake Winnipeg, Lac St. Charles, Lake Simcoe and other water bodies (CWN, 2017). Nutrient pollution can cause environmental imbalance, pose a public health risk for drinking water (USEPA, 2009) and swimming, as inhalation of algae by swimmers or pet can cause hypoxic condition. It can also affect the economy by harming fisheries, tourism, recreation, and increase the treatment cost of drinking water. Historical algal bloom in the Lake Erie during 1960s caused a substantial decline of native aquatic species (CWN, 2017). In 2015 more than 5,000 km² of Lake Erie was covered by algal blooms rendering the water unsuitable for drinking for residents of Pelee Island, Ontario and Toledo, Ohio (CWN, 2017). In 2011 and 2014, severe nutrient pollution in this lake caused service interruption, equal to $71 million and $65 million USD (Bingham, Sinha, & Lupi, 2015). Reports of nutrient pollution are increasing across Canada causing more beach closures and decline in water quality and fisheries (CWN, 2017).

Excessive algal growth requires both phosphorus and nitrogen. While in some environments nitrogen is considered to be the limiting nutrient that controls such growth, phosphorus has been considered as the main limiting factor in most freshwaters (Howarth & Marino, 2006; Schindler et al., 2016). Therefore, controlling the load of phosphorous leaving a sub-watershed can reduce the chances of nutrient pollution in receiving surface waters. Formation of policies such as Lake Simcoe Phosphorous Offsetting Policy (LSPOP) are examples of such an approach. LSPOP requires a Zero Export Target where all new developments should control 100% of phosphorus from leaving the property (LSRCA, 2021).

In addition to contaminating surface waters, abundance of nutrients can also contaminate the ground waters. Contrary to surface waters, nitrogen is the primary nutrient of concern regarding groundwater quality. Hobbie, et al. (2017) reported that only 22 % of phosphorous is retained within its watershed, while the same estimated for nitrogen is 80%. Therefore, most of the nitrogen is leached in the groundwater or transformed through denitrification. Phosphorus retained in the watershed is often in particle form. Therefore, it tends to be bound to soil particles and retained in the vadose zone (area between ground surface and the groundwater table). However, nitrogen is often available in dissolved form which is more mobile and bioavailable. Thus, it can travel through the vadose zone and contaminate the groundwater.

Nutrient Management

Due to their differing stoichiometry, managing nitrogen pollution is different from that of phosphorous. To reduce the nitrogen pollution, the watershed inputs should be reduced in general, while reducing phosphorus pollution would require reducing the movement of phosphorus from the contributing areas in the watershed (Hobbie et al., 2017).

The key method for nutrient management is source control, or prevention of pollutants from entering stormwater, at the source. Low Impact Development (LID) features are source control measures in this way. Source control policies are cost effective tools for nutrient management (Marsalek and Viklander, 2011) that support and encourage the implementation of LIDs. Examples of such policies are adapted by Lake Simcoe Region Conservation Authority, South Nation Conservation (SNC), Nottawasaga Valley Conservation Authority (NVCA), and Halton Region in Ontario, as well as Chesapeake Bay and Mississippi River Basin (Region of Waterloo, 2017), municipalities as nutrient management by-laws, provinces like Ontario Nutrient Management Act and the Great Lakes Protection Act, and countries like Great Lakes Agreement between Canada and the US (CWN, 2017). Additionally, design guidelines such as this one, provide tools for design and implementation of LIDs. While historically these guidelines indicated percent removal rates, the recent approaches are guiding to meet specific numeric objectives such as concentration (Clark and Pitt, 2012).

Selection of the LID type and its implementation for proper nutrient management, requires a good understanding of site limitations, sources of nutrients, their forms (particulate/soluble), and nutrient removal mechanisms associated with each LID type. The sources of nutrients and removal mechanisms are reviewed in this page, for additional details on phosphorus and nitrogen, refer to their relative pages.

Nutrient sources

The extreme amounts of nutrients are both due to the general increase of their availability and the decreased removal capacity of natural systems. Following the important technological advancements in early 20th century (Haber-Bosch process), nitrogen in the form of ammonia has increased significantly due to the ongoing production of fertilizers. While the increase in agricultural production has been a beneficial effect of this finding, it has also led to excessive amounts of nutrient source loading. The decrease in nutrient retention capacity is due to the modification of natural systems such as the increased impervious surfaces along with reduction of vegetation, stream channelization and modification and degradation of riparian zones (Collins et al, 2010).

Sources of nutrients are urban surfaces, agricultural activities, as well as the atmosphere itself. Among different urban surfaces, turfs, lawns, and gardens have a high contribution to nutrients in stormwater (Muller et al., 2020). The grass clippings and application of fertilizer and pesticide, renders lawns and turfs as one of the main contributors of total and dissolved phosphorus in stormwater (Muller et al, 2020). Additionally, fallen vegetation foliage is another contributor of a watershed’s nutrient output and specially phosphorus. Selbig, 2016 has reported foliage, contributing to more than 50% of annual phosphorus loads, excluding winter season. The salt used for de-icing in in cold climate areas may contain impurities that carries nitrogen and phosphorus (Muller et al, 2020). Other activities in urban areas such as construction, fuel deposition by vehicles, and leaking of sewer pipes or septic tanks can also contribute to overall nutrient pollution. Similar to urban landscapes, agricultural activity contributes to the nutrient loads by fertilizer and pesticide applications, as well as manure. The nutrient loads from agricultural activities are more significant than urban landscapes. Atmospheric deposition is another source of nutrients, where the atmosphere is rather a carrier than a source of aerosol nutrients created by industrial, or transportation activities (Muller et al, 2020).

A shallow excavated surface depression containing prepared filter media, mulch, and planted with selected vegetation.

Refers to the conditions in which an organism lives and survives or the conditions in which an organism resides. These conditions can be described as aspects of a “physical”, “social” or an “economic” environment, depending on the perspective perceived by the observer.

The portion of water precipitated onto a catchment area, which then flows as surface discharge from the catchment area past a specified point.

Water from rain, snow melt, or irrigation that flows over the land surface.

Watercourses and Lake Ontario, to which Stormwater and Combined Sewer Overflows discharge.

Lake Simcoe Region Conservation Authority

The drainage area of a river.

An area of land that drains into a river or a lake. The boundary of a watershed is based on the elevation (natural contours) of a landscape.

The upper surface of the zone of saturation, except where the surface is formed by an impermeable body.

The water below the surface, and typically below the groundwater table.

Stoichiometry in the terms of stormwater nutrient ratios is the consequences of mass balance of chemical elements constrained by either biological or ecological factors (i.e. media, sand, vegetation, soils, etc.).

A practice or structural measure that is usually implemented at the beginning of a drainage system or at the lot level, to reduce the volume of runoff and minimize the concentration of pollution in overland flow from private property and prevent pollutants from entering Stormwater runoff or other environmental media, as described by the Ministry of Environment.

Surface runoff from at-grade surfaces, resulting from rain or snowmelt events.

Low impact development is a stormwater management and land development strategy applied at the parcel and subdivision scale that emphasizes conservation and use of on-site natural features integrated with engineered, small scale hydrologic controls to more closely mimic pre-development hydrologic functions.

A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting.

Low Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting.

A practice or structural measure that is usually implemented at the beginning of a drainage system or at the lot level, to reduce the volume of runoff and minimize the concentration of pollution in overland flow from private property and prevent pollutants from entering Stormwater runoff or other environmental media, as described by the Ministry of Environment.

Ground depression acting as a flow control and water treatment structure, that is normally dry.

The total mass of a pollutant entering a waterbody over a defined time period.

The net amount of something (e.g. chemical, such as phosphorus), calculated as the product of concentration and volume in a given time. Some BMPs significantly reduce loading of pollutants to the environment by reducing volume more so than concentration.

A hard surface area (e.g., road, parking area or rooftop) that prevents or retards the infiltration of water into the soil.

A shallow excavated surface depression containing prepared filter media, mulch, and planted with selected vegetation.

State of the art methods or techniques used to manage the quantity and improve the quality of wet weather flow. BMPs include Source, Conveyance and End-Of-Pipe Controls.

The portion of water precipitated onto a catchment area, which then flows as surface discharge from the catchment area past a specified point.

Water from rain, snow melt, or irrigation that flows over the land surface.

Refers to the conditions in which an organism lives and survives or the conditions in which an organism resides. These conditions can be described as aspects of a “physical”, “social” or an “economic” environment, depending on the perspective perceived by the observer.