8,255
edits
Changes
Jump to navigation
Jump to search
Created page with "Gravel diaphragms are simply gravel filled trenches which act as inlet structures by redistributing concentrated flow to sheet flow: reducing the erosive power of the water an..."
Gravel diaphragms are simply gravel filled trenches which act as inlet structures by redistributing concentrated flow to sheet flow: reducing the erosive power of the water and promoting infiltration. They also act as a pretreatment by settling out sediment particles before they reach any downstream structure or practice.
{{TextBox|1=Gravel diaphragms are ideal for distributing flow and providing pretreatment for
*[[Bioretention cells]]
*[[Bioswales]]
*[[Enhanced grass swales]]
*[[Vegetated filter strips]]}}
===Planning considerations===
*Diaphragms can be designed along curves as readily as straight lines,
*As they are not a conveyance practice, they should be designed along a single contour line, promoting the level spreading function,
*Flow should be directed into the device laterally,
===Design===
*Where flow comes off an impervious surface, a drop of 75 mm or more to the surface level of the diaphragm is recommended,
*Typical dimensions for the trench excavation are 300 mm deep and 600 mm wide. The trench may be any length,
*The trench should be lined with before filling with gravel,
*River rock or decorative aggregate may be included in a layer at the top of the gravel fill, for aesthetic value.
===Materials===
<h4>Geotextile</h4>
{{:geotextiles}}
<h4>Gravel</h4>
{{:Pea gravel}}
===References===
[http://vwrrc.vt.edu/swc/april_22_2010_update/DCR_BMP_Spec_No_2_SHEET_FLOW_Final_Draft_v1-8_04132010.htm|VIRGINIA DCR STORMWATER DESIGN SPECIFICATION No. 2]
{{:Feedback}}
{{TextBox|1=Gravel diaphragms are ideal for distributing flow and providing pretreatment for
*[[Bioretention cells]]
*[[Bioswales]]
*[[Enhanced grass swales]]
*[[Vegetated filter strips]]}}
===Planning considerations===
*Diaphragms can be designed along curves as readily as straight lines,
*As they are not a conveyance practice, they should be designed along a single contour line, promoting the level spreading function,
*Flow should be directed into the device laterally,
===Design===
*Where flow comes off an impervious surface, a drop of 75 mm or more to the surface level of the diaphragm is recommended,
*Typical dimensions for the trench excavation are 300 mm deep and 600 mm wide. The trench may be any length,
*The trench should be lined with before filling with gravel,
*River rock or decorative aggregate may be included in a layer at the top of the gravel fill, for aesthetic value.
===Materials===
<h4>Geotextile</h4>
{{:geotextiles}}
<h4>Gravel</h4>
{{:Pea gravel}}
===References===
[http://vwrrc.vt.edu/swc/april_22_2010_update/DCR_BMP_Spec_No_2_SHEET_FLOW_Final_Draft_v1-8_04132010.htm|VIRGINIA DCR STORMWATER DESIGN SPECIFICATION No. 2]
{{:Feedback}}