Feedback post on Curb cuts
Jump to navigation
Jump to search
99.244.186.59 did not find what they were looking for.
4 years agoTitle of this page should be 'Curb Inlets' (not 'Curb Cuts' to be consistent with the title of the link on the home page.
2nd line - add a hyphen between 'well' and 'suited' and between 'cross' and 'slope'
The last sentence that reads 'this might be the local topography...parkland?' is odd and seems either incomplete or should not include a question mark.
3rd line - Change the word 'As' to 'Since' to start the sentence.
4th line- 'OPSD' should include the full spelling of the acronym or should be tied to a link that explains the acronym.
Sizing section, 1st line - Change text from 'The inlet must be of width." to 'The inlet must be of the width that is defined by the following formula'.
In the formula under Sx - Add a hyphen between 'cross' and 'slope'
In the 3rd line of the second formula descriptors - Add a hyphen between 'cross' and 'slope'
Throughout the text on this page use 'Curb Inlet' in place of 'Curb Cut' for consistency with the title of the page/home page.
The page would benefit from some discussion related to trash grates along with some examples. There should also be a recommendation to avoid squared-off edges since these tend to get damaged by snow plows.
Is this feedback helpful?YesNo
99.244.186.59 did not find what they were looking for.
4 years ago