Screening LID options

Process for selecting an individual or suite of LID Options

Process Diagram for Screening LID Options

This guidance article intends to help reduce the number of LID options in the preliminary phases of design and to alert the designer to LID opportunities unique to the site-type being assessed. When going through the process of screening LID options, it is important to have a larger contextual understanding of Integrated water management, Site design strategies, Siting and layout of development, and Link title.

Site Conditions

Complete definition of pre-development site conditions is essential prior to screening of potential stormwater BMPs. The designer should prepare maps describing site conditions and identifying all environmental features and functions that need consideration in accordance with provincial, municipal and conservation authority development regulations. This includes watercourses and small drainage features, floodplains, important recharge areas, steep slopes, wetlands, natural heritage conservation areas and significant wildlife habitats. In addition, information regarding native soil types, infiltration capacity and depth to water table must be determined.

In retrofit scenarios, site conditions will vary and maps can be explicit with land-use type. Road right of ways, parks, residential, industrial, commercial and/or institutional should be noted.

For additional information on site conditions to note for:

• Road right of way retrofits, see Site Conditions Road Right of Ways
• Public lands including parks, churches, or schools, see Public Lands Site Conditions
• Commercial, industrial and multi-residential, see Site Conditions Commercial, Industrial, and Multi-Residential
• Residential, see Site Conditions Residential

Define design criteria

Design criteria should be required to:

• Preserve groundwater and baseflow characteristics
• Prevent undesirable and costly geomorphic changes in the watercourse
• Prevent any increases in flood risk potential
• Protect water quality
• Maintain an appropriate diversity of aquatic life and opportunities for human uses

The design criteria required to protect, enhance or restore the environmental resources can be grouped under the following five categories:

• Flood protection
• Water quality
• Erosion control
• Groundwater recharge
• Natural heritage systems or green infrastructure

Screen potential LID options

Site constraints

When attempting to apply stormwater BMPs within a development site, give careful consideration to site conditions and constraints. See this handy table for and outline of the factors constraining the use of each LID BMP. Further information regarding constraints to the design of various end-of-pipe BMPs can be found in the Ontario Ministry of the Environment Stormwater Management Planning and Design Manual (2003). Before resorting to end-of-pipe BMPs, evaluate whether LID BMPs can meet the design criteria.

LID opportunities and land use types

When working in retrofit scenarios, note that each particular land-use type - road ROWs, residential, industrial, commercial, institutional, and park lands - all provide unique opportunities and challenges:

• LID opportunities and road types

• LID opportunities in residential types

• LID Opportunities in Industrial & Commercial Types

• LID opportunities in park lands

Performance requirements

Resources for evaluating LID practices within Ontario can be found at Sustainable Technologies Evaluation Program (STEP) and Credit Valley Conservation's LID Monitoring program. For a global perspective on LID performance across various geographical regions, check out the International Stormwater BMP Database. Performance data can be downloaded or uploaded and statistical analysis tools are provided.

Operations and maintenance requirements

The LID Inspection and Maintenance Guide is intended to assist municipalities and industrial/commercial/institutional (ICI) property managers with developing their capacity to integrate LID BMPs into their stormwater infrastructure programs. Part 1 of the document provides guidance on designing an effective LID BMP inspection and maintenance program, based on experiences and advice from leading jurisdictions in the United States, adapted to an Ontario context. Part 2 of the document establishes standard cold climate protocols for inspection, testing and maintenance of seven types of structural LID BMPs.

Life cycle costing

STEP has developed a useful tool for estimating the capital and life-cycle costsof LID practices. STEP built this tool after evaluating LID practices and design scenarios for input costs, maintenance requirements, rehabilitation costs and practice designs relevant to Canadian climates.

Selection of suite of LIDs: the Treatment Train Tool

LID Treatment Train Tool

In order to assess if the selected suite of BMPs effectively meet the design criteria, use either computer models or simple spreadsheet models. Base Model selection on the size and type of development. A wide range of simple to complex computer models such as Visual OTTHYMO, SWMM, SWMMHYNO, HSP-F andQUALHYMO are available.

Recently, Lake Simcoe Region Conservation Authority (LSRCA), Credit Valley Conservation (CVC) and Toronto and Region Conservation Authority (TRCA) developed the [http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/%7CLow Impact Development Treatment Train Tool to help developers, consultants, municipalities and landowners understand and implement sustainable stormwater management planning and design practices. The tool's purpose is to analyze annual and event-based runoff volumes and pollutant load removal by the use of LID best management practices. It provides preliminary water budget analysis, (i.e. surface ET, surface runoff, infiltration-to-soil and pollutant-load-removal estimates for pre- and post-development scenarios. Built using the the open source EPA SWMM5 model, the TTT provides a user-friendly interface for novice modellers and is cross-compatible with SWMM5 for advanced model development.

Assess effectiveness

After selecting a suite of BMPs and running the models, make a comparison between the modelling results results and the environmental design criteria. Employ nn iterative approach, which involves adjusting the size or adding/deleting BMPs until the environmental design criteria are met. The LID Treatment Train Tool can help with adjusting the size of the features to meet design criteria. Once met, the project can proceed to the detailed design stage.

Low Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting.

refers to the characteristics and functions of a system prior to urban development.

The addition of water to ground water by natural or artificial processes.

The infiltration and movement of surface water into the soil, past the vegetation root zone, to the zone of saturation or water table.

The natural ground material characteristic of or existing by virtue of geographic origin.

The upper surface of the zone of saturation, except where the surface is formed by an impermeable body.

Subsurface water level which is defined by the level below which all the spaces in the soil are filled with water; The entire region below the water table is called the saturated zone.

(a) A natural well-defined channel produced wholly or in part by a definite flow of water and through which water flows continuously or intermittently. Also, a ditch, canal, aqueduct, or other artificial channel for the conveyance of water to or away from a given place, as for the draining of a swamp.

(b) A stream or current of water. Legally, a natural stream arising in a given drainage basin but not wholly dependent for its flow on surface drainage in its immediate area, flowing in a channel with a well-defined bed between visible banks or through a definite depression (as a ravine or swamp) in the surrounding land, having a definite and permanent periodic supply of water (the stream may be intermittent), and usually, but not necessarily having a perceptible current in a particular direction and discharging at affixed point into another body of water.

(c) A legal right permitting the use of a flow of a stream (especially of one flowing through one’s land) or the receipt of water discharged upon land belonging to another.

Includes the protection of soil from dislocation by water, wind or other agents.

Increases in groundwater storage by natural conditions or by human activity. See also artificial recharge

The inflow of surface water to a groundwater reservoir or aquifer.

Best management practice. State of the art methods or techniques used to manage the quantity and improve the quality of wet weather flow. BMPs include: source, conveyance and end-of-pipe controls.

Refers to the conditions in which an organism lives and survives or the conditions in which an organism resides. These conditions can be described as aspects of a “physical”, “social” or an “economic” environment, depending on the perspective perceived by the observer.

Sustainable Technologies Evaluation Program

Lake Simcoe Region Conservation Authority

Credit Valley Conservation

Toronto and Region Conservation Authority

The portion of water precipitated onto a catchment area, which then flows as surface discharge from the catchment area past a specified point.

Water from rain, snow melt, or irrigation that flows over the land surface.

The total mass of a pollutant entering a waterbody over a defined time period.

State of the art methods or techniques used to manage the quantity and improve the quality of wet weather flow. BMPs include Source, Conveyance and End-Of-Pipe Controls.

The mathematical expression of the water balance.

Evapotranspiation

The slow movement of water into or through a soil or drainage system.

Penetration of water through the ground surface.

(1) Something that pollutes, especially a waste material that contaminate air, soil, or water. (2) Any solute or cause of change in physical, chemical or biological properties that render water unfit for a given use.