Difference between revisions of "Iron filings (ZVI)"
(Created page with "==What is it?== ZVI is scrap iron filings and describes the elemental form of iron with a zero charge carried by each atom – a result of the outer valence level being filled...") |
|||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | [[File:Železo.png|thumb|ZVI]] | ||
==What is it?== | ==What is it?== | ||
| − | ZVI is | + | Iron filings or zero-valent iron (ZVI) is the elemental form of iron with a zero charge carried by each atom – a result of the outer valence level being filled. ZVI is able to remove dissolved phosphorus (phosphate) from solution through precipitation. <ref name=Rossetti>Rossetti M. Evaluation of phosphorous removals by biochar supported nano-scale zero-valent iron. 2017. Chemical Engineering Undergraduate Honors Thesis.</ref> Zero-valent iron nanoparticles (nZVI) are also used for [[phosphorus]] removal. |
| + | |||
==How is it being used?== | ==How is it being used?== | ||
No projects that use ZVI were found in Ontario. | No projects that use ZVI were found in Ontario. | ||
==Benefits== | ==Benefits== | ||
| − | A study was done that compared the phosphorus reduction capabilities of ZVI, biochar, biochar-supported ZVI (ZVI/BC), and biochar-supported nZVI (nZVI/BC). <ref name=Rossetti/> It was found that nZVI/BC had the highest phosphorus reduction. Using biochar-supported ZVI or nZVI improves the dispersion and stability of the iron filings. Biochar is fine-grained and highly porous, providing a large surface area to support nZVI. | + | A study was done that compared the phosphorus reduction capabilities of ZVI, [[biochar]], biochar-supported ZVI (ZVI/BC), and biochar-supported nZVI (nZVI/BC). <ref name=Rossetti/> It was found that nZVI/BC had the highest phosphorus reduction. Using biochar-supported ZVI or nZVI improves the dispersion and stability of the iron filings. Biochar is fine-grained and highly porous, providing a large surface area to support nZVI. |
Another paper reports that ZVI can remove up to 98% of influent phosphorus at low input concentrations, and at high concentrations is shown to remove up to 36% of incoming phosphorus. The phosphorus retained in the soil is mostly iron-bound, which will not be easily leached out of the system because it is very stable.<ref>Lechner L. Phosphorus Removal From Stormwater Using Zero-Valent Iron. 2016. Applied Science Masters Thesis.</ref> | Another paper reports that ZVI can remove up to 98% of influent phosphorus at low input concentrations, and at high concentrations is shown to remove up to 36% of incoming phosphorus. The phosphorus retained in the soil is mostly iron-bound, which will not be easily leached out of the system because it is very stable.<ref>Lechner L. Phosphorus Removal From Stormwater Using Zero-Valent Iron. 2016. Applied Science Masters Thesis.</ref> | ||
| − | + | ==References== | |
| + | [[category:materials]] | ||
| + | [[category:phosphorus]] | ||
| + | [[Category: Water quality]] | ||
Latest revision as of 20:39, 27 September 2022
What is it?[edit]
Iron filings or zero-valent iron (ZVI) is the elemental form of iron with a zero charge carried by each atom – a result of the outer valence level being filled. ZVI is able to remove dissolved phosphorus (phosphate) from solution through precipitation. [1] Zero-valent iron nanoparticles (nZVI) are also used for phosphorus removal.
How is it being used?[edit]
No projects that use ZVI were found in Ontario.
Benefits[edit]
A study was done that compared the phosphorus reduction capabilities of ZVI, biochar, biochar-supported ZVI (ZVI/BC), and biochar-supported nZVI (nZVI/BC). [1] It was found that nZVI/BC had the highest phosphorus reduction. Using biochar-supported ZVI or nZVI improves the dispersion and stability of the iron filings. Biochar is fine-grained and highly porous, providing a large surface area to support nZVI. Another paper reports that ZVI can remove up to 98% of influent phosphorus at low input concentrations, and at high concentrations is shown to remove up to 36% of incoming phosphorus. The phosphorus retained in the soil is mostly iron-bound, which will not be easily leached out of the system because it is very stable.[2]