Difference between revisions of "Topsoil"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
(Created page with "<p>High quality topsoil shall be in compliance with Ontario Regulation 153/04 Record of Site Condition standards for soil quality or as amended through Ontario excess soil ma...")
 
 
(23 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<p>High quality topsoil shall  be in compliance with Ontario Regulation 153/04 Record of Site Condition standards for soil quality or as amended through Ontario excess soil management policies and standards.</p> 
+
<ul>
Such a determination may be made by conducting a Phase 1 or 2 environmental site assessment or preparing an Excess Soil Management Plan.
+
<li>Topsoil may be material that was stripped from the project site and stored in stockpiles for re-use, or material imported to the site from a supplier provided the physical and chemical characteristics are within acceptable ranges.</li>
<p>Topsoil may be material that was stripped from the project site and stored in stockpiles for re-use or material imported to the site from a supplier provided the physical and chemical characteristics are within acceptable ranges.</p>
+
<li>Topsoil shall  be in compliance with [https://www.ontario.ca/page/soil-ground-water-and-sediment-standards-use-under-part-xv1-environmental-protection-act Ontario Regulation 153/04 Record of Site Condition] standards for soil quality or as amended through [https://www.ontario.ca/page/management-excess-soil-guide-best-management-practices Ontario Management of Excess Soil - A Guide for Best Management Practices.]</li>
<p>Soil laboratory reports shall certify the material to be suitable for re-use on residential, parkland, institutional, industrial, commercial, or community landscapes for the germination of seeds and the support of vegetative growth.</p>
+
<li>Soil laboratory reports shall certify the material to be suitable for re-use on residential, parkland, institutional, industrial, commercial, or community landscapes for the germination of seeds and the support of vegetative growth.</li>
 +
</ul>
 +
 
 +
The factors to consider in determining if a topsoil is suitable for use as planting soil for a vegetated stormwater practice, or use in producing a bioretention filter media mixture include the following:
 +
* Must be friable and capable of sustaining vigorous plant growth;
 +
* Must be free from toxic material and roots, stones or debris over 50 mm (2") in diameter;
 +
* Should not have been passed through sieves or screens smaller than 50 mm (2”) to avoid eliminating peds;
 +
* Should have a Loamy Sand, Sandy Loam, Sandy Clay Loam, Loam or Silty Loam soil texture;
 +
* For use as planting soil for a vegetated stormwater practice , the topsoil must contain a minimum of 5% organic matter by dry weight or be amended so, through addition of an organic soil conditioner;
 +
* For use in producing bioretention filter media Blend B (water quality treatment priority), the topsoil must contain at least 9%, and not greater than 36% clay-sized particles and at least 2% organic matter by dry weight.
 +
* Must have a pH of between 6.0 and 8.0;
 +
* Must have a sodium absorption ratio less than 15;
 +
* Must have a cationic exchange capacity greater than 10 milliequivalents per 100 grams (meq/100 g).
 +
 
 +
Specify that 4 litre samples of topsoil, from each source to be drawn upon, be provided to the consultant for visual inspection, along with topsoil quality test results from an accredited soil testing laboratory, or a quality assurance certificate from the supplier.
 +
 
 +
We recommend a planting soil or filter media depth of 300 mm to support grasses, 600 mm for shrubs and perennials, and 1000 mm for trees.
 +
 
 +
 
 +
[[category: materials]]

Latest revision as of 16:53, 11 September 2020

  • Topsoil may be material that was stripped from the project site and stored in stockpiles for re-use, or material imported to the site from a supplier provided the physical and chemical characteristics are within acceptable ranges.
  • Topsoil shall be in compliance with Ontario Regulation 153/04 Record of Site Condition standards for soil quality or as amended through Ontario Management of Excess Soil - A Guide for Best Management Practices.
  • Soil laboratory reports shall certify the material to be suitable for re-use on residential, parkland, institutional, industrial, commercial, or community landscapes for the germination of seeds and the support of vegetative growth.

The factors to consider in determining if a topsoil is suitable for use as planting soil for a vegetated stormwater practice, or use in producing a bioretention filter media mixture include the following:

  • Must be friable and capable of sustaining vigorous plant growth;
  • Must be free from toxic material and roots, stones or debris over 50 mm (2") in diameter;
  • Should not have been passed through sieves or screens smaller than 50 mm (2”) to avoid eliminating peds;
  • Should have a Loamy Sand, Sandy Loam, Sandy Clay Loam, Loam or Silty Loam soil texture;
  • For use as planting soil for a vegetated stormwater practice , the topsoil must contain a minimum of 5% organic matter by dry weight or be amended so, through addition of an organic soil conditioner;
  • For use in producing bioretention filter media Blend B (water quality treatment priority), the topsoil must contain at least 9%, and not greater than 36% clay-sized particles and at least 2% organic matter by dry weight.
  • Must have a pH of between 6.0 and 8.0;
  • Must have a sodium absorption ratio less than 15;
  • Must have a cationic exchange capacity greater than 10 milliequivalents per 100 grams (meq/100 g).

Specify that 4 litre samples of topsoil, from each source to be drawn upon, be provided to the consultant for visual inspection, along with topsoil quality test results from an accredited soil testing laboratory, or a quality assurance certificate from the supplier.

We recommend a planting soil or filter media depth of 300 mm to support grasses, 600 mm for shrubs and perennials, and 1000 mm for trees.