2,121
edits
Changes
Jump to navigation
Jump to search
Line 142:
Line 142: − + + + − *[[Geotextiles]] are used with structural soils to prevent migration of fines from the road or sidewalk base into the structural soils. In BC, a Nilex 4545 fabric is used for this purpose, but other fabrics may also be suitable.+ − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→Structural Soil Comparisons
===Soil Volume===
===Soil Volume===
Each tree planted should have access to a minimum 30 m<sup>3<sup> of soil volume, including the growing medium within the tree pit and growing or structural soil medium below adjacent supported pavement. If more than one tree shares the same trench a minimum 20 m3 of soil per tree may be acceptable. It should be noted that structural soils are mostly filled with rock and will therefore have much lower soil volumes. However, trees have been found to grow reasonably well in these soils because roots only occupy a portion of the total soil medium.
Each tree planted should have access to a minimum 30 m<sup>3</sup> of soil volume, including the growing medium within the tree pit and growing or structural soil medium below adjacent supported pavement. If more than one tree shares the same trench a minimum 20 m3 of soil per tree may be acceptable. It should be noted that structural soils are mostly filled with rock and will therefore have much lower soil volumes. However, trees have been found to grow reasonably well in these soils because roots only occupy a portion of the total soil medium.
Structural soils consist of 3 components, mixed in the following proportions by weight: a load bearing stone lattice, soil, and a tackifier. Soils may be clay loam or coarser textured soil if drainage is a priority. Common tackifiers include ‘hydrogel’, a coated potassium propenoate-propenamide copolymer) or ‘stabilizer’, a plant based organic product sourced from the US.
Structural soils consist of 3 components, mixed in the following proportions by weight: a load bearing stone lattice, soil, and a tackifier. Soils may be clay loam or coarser textured soil if drainage is a priority. Common tackifiers include ‘hydrogel’, a coated potassium propenoate-propenamide copolymer) or ‘stabilizer’, a plant based organic product sourced from the US.
*Crushed [[stone]] (granite or limestone) should be narrowly graded, highly angular with no fines. Stone sizes may vary between 20 to 75 mm. In British Columbia, a larger 75 mm stone (range between 60 and 80 mm) is used because it was found to allow for larger soil volumes (up to 33% of the total soil medium volume).
*Crushed [[stone]] (granite or limestone) should be narrowly graded, highly angular with no fines. Stone sizes may vary between 20 to 75 mm. In British Columbia, a larger 75 mm stone (range between 60 and 80 mm) is used because it was found to allow for larger soil volumes (up to 33% of the total soil medium volume).
*[[Geotextiles]] are used with structural soils to prevent migration of fines from the road or sidewalk base into the structural soils. In BC, a Nilex 4545 fabric is used for this purpose, but other fabrics may also be suitable.
*Compaction to 95% SPD is achieved in 1 m lifts to 95% SPD. Testing of compaction of levels is accomplished with a trolled nuclear densometer for larger rock size mixes.
====Structural Soil Comparisons====
*Compaction to 95% SPD is achieved in 1 m lifts to 95% SPD. Testing of compaction of levels is accomplished with a trolled nuclear densometer for larger rock size mixes.
{|class="wikitable"
|+Specifications for Stormwater Tree Trenches using Structural Soils
|-
!Structural Soil Type
!Median Stone size/range
!Soil Texture
!Tackifiying Agent
!Approximate Porosity
|-
|'''[https://gailmaterials.net/wp-content/uploads/2019/08/cu-structural_soil_specifications.pdf CU-Soil™]'''
|30mm (20-40mm)*
|
Gravel: <5%<br>
Sand: 20-45%<br>
Silt: 20-50%<br>
Clay: 20-40%<br>
Cation Exchange Capacity (CEC) >10<br>
pH: 5.5 – 6.5<br>
Organic Content: 2 – 5% by dry weight
|[http://www.amereq.com/pages/12/index.htm Hydrogel (coated potassium propenoate-propenamide copolymer)]
|26%
|-
|'''B.C Soil'''
|75mm/60 – 80mm)
|
Sand: 45-55%<br>
Silt: 25-35%<br>
Clay: 0 – 10%<br>
Silt + Clay: 25 – 45%<br>
pH: 6.0 – 7.0<br>
Organic Content: 15-20%**
|[http://www.stabilizersolutions.com/products/stabilizer/ Stabilizer]
|33%
|-
| colspan="5" style="text-align: left;" |<small>'''Note:'''<br>
"*" = Larger or smaller stone sizes are accepted as long as they do not comprise more than 10% above or 10% below the indicated range.<br>
"**" = Soil texture is the City of Vancouver specification for structural soils</small>
|}
===Modular Soil Support Systems===
===Modular Soil Support Systems===