Difference between revisions of "Siting and layout of development"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
 
(12 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
==Strategies==
 
==Strategies==
 
===Fit the design to the terrain===
 
===Fit the design to the terrain===
Using the terrain and natural drainage as a design element is an integral part to creating a hydrologically functional landscape.<ref>Prince George’s County. 1999. Low Impact Development Design Strategies: An Integrated Design Approach. Prince George’s County, MD.</ref> Fitting development to the terrain will reduce the amount of clearing and grading required and the extent of necessary underground drainage infrastructure. This helps to preserve pre-development drainage boundaries which helps to maintain distribution of flows. Generally, siting development in upland areas will take advantage of lowland areas for conveyance, storage, and treatment.
+
Using the terrain and natural drainage as a design element is an integral part to creating a hydrologically functional landscape.<ref>Prince George’s County. 1999. Low Impact Development Design Strategies: An Integrated Design Approach. Prince George’s County, MD.</ref> Fitting development to the terrain will reduce the amount of clearing and [[grading]] required and the extent of necessary underground drainage infrastructure. This helps to preserve pre-development drainage boundaries which helps to maintain distribution of flows. Generally, siting development in upland areas will take advantage of lowland areas for conveyance, storage, and treatment.
  
 
===Open space and clustered development===
 
===Open space and clustered development===
Line 10: Line 10:
  
 
===Street network designs===
 
===Street network designs===
Certain roadway network designs create less impervious area than others. Figure 3.2.3 from the Canadian Mortgage and Housing Corporation (2002) demonstrates that loop and cul-de-sac street patterns require less area for streets. These layouts by themselves may not achieve the many goals of urban design.  However, used in a hybrid form together or with other street patterns, they can meet multiple urban design objectives and reduce the necessary street area (CMHC, 2002). A study comparing different road network designs for a hypothetical community showed a fused grid pattern can reduce impervious cover by 4.3% compared to a traditional neighbourhood design (CMHC, 2007).
+
{| class="wikitable" style="float:right; margin-left: 10px;"
 +
|-
 +
|+ Figure adapted from CMHC (2007)
 +
!
 +
!Square grid
 +
!Fused grid A
 +
!Fused grid B
 +
!Fused grid C
 +
!Fused grid D
 +
|-
 +
!
 +
|[[File:Square Grid.png|frameless|upright=0.35]]
 +
|[[File:VFGA.png|frameless|upright=0.35]]
 +
|[[File:VFGB.png|frameless|upright=0.35]]
 +
|[[File:VFGC.png|frameless|upright=0.35]]
 +
|[[File:VFGD.png|frameless|upright=0.35]]
 +
|-
 +
|Percent of area for streets
 +
|35.0 %
 +
|27.4 %
 +
|27.4 %
 +
|23.7 %
 +
|23.7 %
 +
|-
 +
|Percent of buildable area
 +
|60.0 %
 +
|63.6 %
 +
|64.3 %
 +
|68.0 %
 +
|68.0 %
 +
|-
 +
|Percent of open space
 +
|5 % required
 +
|9.0 %
 +
|8.3 %
 +
|8.3 %
 +
|8.3 %
 +
|}
 +
 
 +
Certain roadway network designs create less impervious area than others. The figure from the Canadian Mortgage and Housing Corporation (2002) demonstrates that loop and cul-de-sac street patterns require less area for streets. These layouts by themselves may not achieve the many goals of urban design.  However, used in a hybrid form together or with other street patterns, they can meet multiple urban design objectives and reduce the necessary street area.<ref>Canadian Mortgage and Housing Corporation (CMHC). 2002 (Revised 2005, 2007). Residential Street Pattern Design. Research Highlight: Socio-Economic Series 75.</ref>A study comparing different road network designs for a hypothetical community showed a fused grid pattern can reduce impervious cover by 4.3% compared to a traditional neighbourhood design.<ref>Canadian Mortgage and Housing Corporation (CMHC). 2007. Research Highlight: A Plan for Rainy Days: Water Runoff and Site Planning. Socioeconomic Series 07-013. Ottawa, ON.</ref>
  
 
===Reduce roadway setbacks and lot frontages===
 
===Reduce roadway setbacks and lot frontages===
The lengths of setbacks and frontages are a determinant for the area of pavement, street, driveways, and walkways, needed to service a development. Municipal zoning regulations for setbacks and frontages have been found to be a significant influence on the production of stormwater runoff. A study of residential parcels in Madison, Wisconsin found that reducing setbacks by 3 m and frontages by 5.5 m resulted in a 14% reduction of stormwater runoff (Stone and Bullen, 2006).
+
The lengths of setbacks and frontages are a determinant for the area of pavement, street, driveways, and walkways, needed to service a development. Municipal zoning regulations for setbacks and frontages have been found to be a significant influence on the production of stormwater runoff. A study of residential parcels in Madison, Wisconsin found that reducing setbacks by 3 m and frontages by 5.5 m resulted in a 14% reduction of stormwater runoff.<ref>Stone, B. and Bullen, J. 2006. Urban Form and Watershed Management: How Zoning Influences Residential Stormwater Volumes. Environmental and Planning
 +
B: Planning and Design. 33: 21-37.</ref>
 +
 
 +
==References==
  
 
[[category: planning]]
 
[[category: planning]]

Latest revision as of 00:35, 19 October 2018

The site layout is determined in part by the opportunities and constraints of the natural heritage system. The location and configuration of elements, such as streets, sidewalks, driveways, and buildings, within the framework of the natural heritage system provides many opportunities to reduce stormwater runoff. The goals of the site layout are to provide a functional and livable urban form while minimizing environmental impact. The techniques below highlight some of the ways in which site layouts can minimize their hydrologic impacts and preserve natural drainage patterns.

Strategies[edit]

Fit the design to the terrain[edit]

Using the terrain and natural drainage as a design element is an integral part to creating a hydrologically functional landscape.[1] Fitting development to the terrain will reduce the amount of clearing and grading required and the extent of necessary underground drainage infrastructure. This helps to preserve pre-development drainage boundaries which helps to maintain distribution of flows. Generally, siting development in upland areas will take advantage of lowland areas for conveyance, storage, and treatment.

Open space and clustered development[edit]

Clustering development increases the development density in less sensitive areas of the site while leaving the rest of the site as protected community open space. The open space can be undisturbed natural area or actively used recreational space. Features that often characterize open space or clustered development are smaller lots, higher density of structures in one area of a site, shared driveways, and shared parking. From a stormwater perspective, clustered development reduces the amount of impervious surface, reduces pressure on buffer areas, reduces the construction footprint, and provides more area and options for stormwater controls including LID practices.[2]

Street network designs[edit]

Figure adapted from CMHC (2007)
Square grid Fused grid A Fused grid B Fused grid C Fused grid D
Square Grid.png VFGA.png VFGB.png VFGC.png VFGD.png
Percent of area for streets 35.0 % 27.4 % 27.4 % 23.7 % 23.7 %
Percent of buildable area 60.0 % 63.6 % 64.3 % 68.0 % 68.0 %
Percent of open space 5 % required 9.0 % 8.3 % 8.3 % 8.3 %

Certain roadway network designs create less impervious area than others. The figure from the Canadian Mortgage and Housing Corporation (2002) demonstrates that loop and cul-de-sac street patterns require less area for streets. These layouts by themselves may not achieve the many goals of urban design. However, used in a hybrid form together or with other street patterns, they can meet multiple urban design objectives and reduce the necessary street area.[3]A study comparing different road network designs for a hypothetical community showed a fused grid pattern can reduce impervious cover by 4.3% compared to a traditional neighbourhood design.[4]

Reduce roadway setbacks and lot frontages[edit]

The lengths of setbacks and frontages are a determinant for the area of pavement, street, driveways, and walkways, needed to service a development. Municipal zoning regulations for setbacks and frontages have been found to be a significant influence on the production of stormwater runoff. A study of residential parcels in Madison, Wisconsin found that reducing setbacks by 3 m and frontages by 5.5 m resulted in a 14% reduction of stormwater runoff.[5]

References[edit]

  1. Prince George’s County. 1999. Low Impact Development Design Strategies: An Integrated Design Approach. Prince George’s County, MD.
  2. Center for Watershed Protection (CWP). 1998. Better Site Design: A Handbook for Changing Development Rules in Your Community. Ellicott City, MD.
  3. Canadian Mortgage and Housing Corporation (CMHC). 2002 (Revised 2005, 2007). Residential Street Pattern Design. Research Highlight: Socio-Economic Series 75.
  4. Canadian Mortgage and Housing Corporation (CMHC). 2007. Research Highlight: A Plan for Rainy Days: Water Runoff and Site Planning. Socioeconomic Series 07-013. Ottawa, ON.
  5. Stone, B. and Bullen, J. 2006. Urban Form and Watershed Management: How Zoning Influences Residential Stormwater Volumes. Environmental and Planning B: Planning and Design. 33: 21-37.