Changes

The solubility of [[phosphorus]] and [[nitrogen]] are reduced in both acidic and basic soils.

The solubility of [[phosphorus]] and [[nitrogen]] are reduced in both acidic and basic soils.

Design specifications for the media component of LID BMPs pertaining to pH are intended to ensure fertility and suitability for healthy vegetation cover. Where pH deviates from design specification, vegetation cover may be spotty or uneven, growth may be stunted, or in extreme cases, plantings may not survive and vegetation cover becomes dominated by weeds. To ensure the media will support the growth of plantings, which contributes to the drainage and water treatment performance of the BMP and adds aesthetic value, testing of pH should be done as part of Construction, Assumption and Verification [[inspections]].

Design specifications for the media component of LID BMPs pertaining to pH are intended to ensure fertility and suitability for healthy vegetation cover. Where pH deviates from design specification, vegetation cover may be spotty or uneven, growth may be stunted, or in extreme cases, plantings may not survive and vegetation cover becomes dominated by weeds. To ensure the media will support the growth of plantings, which contributes to the drainage and water treatment performance of the BMP and adds aesthetic value, testing of pH should be done as part of construction, assumption and verification [[inspections]].

Soil pH can be determined in the field using inexpensive soil pH testing kits where a small sample of surface soil is mixed with water and reagents which change colour according to the acidity/alkalinity. The soil pH value is determined by comparing the colour and shade to calibrated scales. Soil pH can also be determined using a portable pH meter which involves inserting a rod into a soil-water slurry mixture. Such soil pH tests should be conducted by creating a shallow (5 to 10 centimetre deep) hole in the soil, filling it up with distilled water, stirring to create a slurry mixture, inserting the pH meter rod into the slurry mixture and recording the value displayed on the meter. Alternatively, surface samples can be submitted to a soil testing laboratory accredited by

Soil pH can be determined in the field using inexpensive soil pH testing kits where a small sample of surface soil is mixed with water and reagents which change colour according to the acidity/alkalinity. The soil pH value is determined by comparing the colour and shade to calibrated scales. Soil pH can also be determined using a portable pH meter which involves inserting a rod into a soil-water slurry mixture. Such soil pH tests should be conducted by creating a shallow (5 to 10 centimetre deep) hole in the soil, filling it up with distilled water, stirring to create a slurry mixture, inserting the pH meter rod into the slurry mixture and recording the value displayed on the meter. Alternatively, surface samples can be submitted to a soil testing laboratory accredited by

the province of Ontario for testing by saturated paste method (OMAFRA, 2006). An acceptable procedure for testing soil pH is provided in ASTM D4972 - 13 Standard Test Method for pH of Soils (ASTM International, 2013).

the province of Ontario for testing by saturated paste method<ref>. An acceptable procedure for testing soil pH is provided in [https://www.astm.org/Standards/D4972.htm ASTM D4972 - 13 Standard Test Method for pH of Soils].

 

Ontario Ministry of Agriculture F and RA. Soil Fertility Handbook. (Reid K, ed.). OMAFRA; 2006. http://www.omafra.gov.on.ca/english/crops/pub611/pub611.pdf. Accessed October 17, 2017.</ref>.

When media test results fall outside of the specification range or Acceptance Criteria range, corrective actions are only needed if problems with vegetation cover, condition or composition (i.e., dominance by weeds) are also detected through visual inspection.  

When media test results fall outside of the specification range or acceptance criteria range, corrective actions are only needed if problems with vegetation cover, condition or composition (i.e., dominance by weeds) are also detected through visual inspection.  

*Where vegetation cover is poor, unhealthy or dominated by weeds and soil pH is '''lower'' than the design/product specification or Acceptance Criteria ranges, corrective action involves amending the soil with ground limestone to raise the pH back to neutrality.  

*Where vegetation cover is poor, unhealthy or dominated by weeds and soil pH is '''lower'' than the design/product specification or Acceptance Criteria ranges, corrective action involves amending the soil with ground limestone to raise the pH back to neutrality.  

*Where soil pH is '''higher'' than the design/product specification or Acceptance Criteria ranges, corrective action involves amending the soil with sulphur or [[compost]] to lower the pH back to neutrality. Amendments to [[green roof media]] should be prescribed by the designer, product vendor or media supplier.

*Where soil pH is '''higher'' than the design/product specification or Acceptance Criteria ranges, corrective action involves amending the soil with sulphur or [[compost]] to lower the pH back to neutrality. Amendments to [[green roof media]] should be prescribed by the designer, product vendor or media supplier.

 

 

[[category:Testing]]

[[category:Testing]]

[[category:water quality]]

[[category:water quality]]