Changes

'''Maximizing the perimeter of the water storage reservoir of the facility will enhance drainage performance and directs designers towards longer, linear shapes such as [[infiltration trenches]] and [[bioswales]].''' See illustration for an example.<br>

'''Maximizing the perimeter of the water storage reservoir of the facility will enhance drainage performance and directs designers towards longer, linear shapes such as [[infiltration trenches]] and [[bioswales]].''' See illustration for an example.<br>

To calculate the time (''t'') to fully drain the facility assuming three-dimensional drainage:  

To calculate the time (''t'') to fully drain the facility assuming three-dimensional drainage:  

<math>t=\frac{n\times A_{p}}{f'\times x}ln\left [ \frac{\left (d_{r} + \frac{A_{p}}{x} \right)}{\left (\frac{A_{p}}{x}\right) }\right]</math>

<math>t=\frac{n\times A_{r}}{f'\times x}ln\left [ \frac{\left (d_{r} + \frac{A_{r}}{x} \right)}{\left (\frac{A_{r}}{x}\right) }\right]</math>

Where "ln" means natural logarithm of the term in square brackets <br>

Where "ln" means natural logarithm of the term in square brackets <br>

Adapted from CIRIA, The SUDS Manual C753 (2015).

Adapted from CIRIA, The SUDS Manual C753 (2015).