Dry ponds: TTT

From LID SWM Planning and Design Guide
Revision as of 02:59, 9 November 2017 by Jenny Hill (talk | contribs)
Jump to navigation Jump to search

[[Storage TTT.png|thumb|Dry ponds are found in storage element in the LID TTT.]] thumb|The largest area is at the top, level 0 m; each subsequent lower depth has a smaller area TTT.png

A dry pond as a storage element (key parameters) in the Treatment Train Tool.
Stage Storage
Name Important to have a unique name, to connect it with the catchment area
Storage type Dry detention ponds
Bottom elevation (m) This is important to correspond with other components, e.g. when the overflow is coupled to another BMP within a treatment train
Maximum depth (m)
Lined/unlined Unlined (ideally)
Underlying soil Choose from five; sandy soils drain more quickly.
Evaporation factor ?
Suction head (mm) ?
Saturated conductivity (mm/hr) ?
Initial soil moisture deficit (fraction) ?
Curves
The Curves table is designed to accommodate the side slopes. The top line begins at 0 m, with subsequent depths in the following lines.