Bioretention: Construction checklist

From LID SWM Planning and Design Guide
Revision as of 15:35, 5 July 2017 by Jenny Hill (talk | contribs) (Created page with "Common construction pitfalls can be avoided with careful construction supervision that focuses on the following aspects: <table table class = wikitable> <tr><th colspan =2>Ero...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Common construction pitfalls can be avoided with careful construction supervision that focuses on the following aspects:

Erosion and Sediment Control
Bioretention locations should be blocked from construction traffic and should not be used for erosion and sediment control.
Proper erosion and sediment controls should be in place for the drainage area.

Materials • Gravel for the underdrain should be clean and washed; no fines should be present in the material. • Underdrain pipe material should be perforated and of the correct size. • A cap should be placed on the upstream (but not the downstream) end of the underdrain. • Biomedia should be tested to confirm that it meets specifications. • Mulch composition should be correct.

Elevations Elevations of the following items should be checked for accuracy: • Depth of the gravel and invert of the underdrain • Inverts for inflow and outflow points • Filter depth after biomedia is placed • Ponding depth provided between the surface of the filter bed and the overflow structure • Mulch depth

Landscaping and Stabilization • Correct vegetation should be planted. • Pretreatment area should be stabilized. • Drainage area should be stabilized prior to directing water to the bioretention.

The following items should be checked after the first rainfall event, and adjustments should be made as necessary: • Outfall protection/energy dissipation at concentrated inflow should be stable. • Flow should not concentrate and should spread evenly over the filter bed. • Ponded water at the surface of the bioretenton facility should drain within 24 hours of the end of the storm event. The filter media bed should fully drain within a maximum period of 72 hours. • Excessive sediment accumulation should not be present.