Difference between revisions of "Bioretention"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
()
Line 34: Line 34:
 
<div class="col-md-12">
 
<div class="col-md-12">
  
<table class = "table-responsive">
+
 
<table class="table table-striped">
 
<caption><strong>Types of bioretention cell</strong></caption>
 
<tr class ='success'><th>Form</th><th>Characteristics</th><th>Examples</th></tr>
 
<tr><td>Infiltrating cells</td><td>Used in developments with large landscaping areas, parks, parking lot islands, or any areas without tight space constraints. They have side slopes ≥2:1. Often, they receive sheet flow, but in some cases they are surrounded by curbs and will have inlets. The distinction between these options will determine the recommended types of pre-treatment. </td><td>
 
<gallery mode="packed" widths=300px heights=300px>
 
IMG 2457 750X500.jpg| Bioretention cell capturing and treating runoff from adjacent parking lot at the Kortright Centre, Vaughan. </gallery></td></tr>
 
<tr><td>[[Rain gardens]]</td><td>Often found on residential sites or on land managed by community organisations . This simple variation may be constructed by the property owner and usually excludes the storage layer. </td><td>See main article on rain gardens</td></tr>
 
<tr><td>Bioretention planters (stormwater planters)</td><td>Typically used in ultra-urban areas adjacent to buildings and in plazas. They appear similar to traditional landscaped beds, but differ by receiving runoff from nearby surfaces.</td><td>Image here</td></tr>
 
<tr><td>Extended tree pits (parallel bioretention)</td><td>Located within the right-of-way, occupying the space between sidewalk and street. The inlets can be positioned on either or both sides, and are designed to prevent the system from filling beyond a fixed capacity. When ponding occurs, stormwater bypasses the inlets, making this a 'parallel' system rather than a flow-though or online design. </td><td><gallery mode="packed" widths=300px heights=300px>
 
Kitchener-8.jpg| Extended tree pit on Kings Street, Kitchener. </gallery></td></tr>
 
<tr><td>Curb extensions (bump outs)</td><td>Installed in road-right-of-way, these function as a stormwater facility and a traffic calming measure.  Inlets are integrated into the raised concrete curb and receive flow from the street side.</td><td>Image here</td></tr>
 
</table>
 
</table>
 
  
 
----
 
----

Revision as of 15:53, 28 June 2017

This article is about planted installations designed to capture surface runoff through an engineered soil with subterranean infrastructure.
For simpler, residential systems, see Rain gardens.
For linear systems, which convey flow, but are otherwise similar see Bioswales.

Overview[edit]

Bioretention cells are one of the most well recognized form of Low Impact Development. They can encompass all mechanisms of action: infiltration, filtration and evapotranspiration.

Bioretention cells are an ideal technology for:

  • Fitting functional vegetation into urban landscapes
  • Treating runoff collected from nearby impervious surfaces

The fundamental components of a bioretention cell are:

  • Biomedia: An engineered soil mix
  • Planting
  • Storage layer of coarse aggregate
Additional components may include:
  • Under-drain to redistribute or remove excess water
  • Impermeable membrane to prevent infiltration to soils below

<panelSuccess>

</panelSuccess>



Planning Considerations[edit]

Planning Content

<panelSuccess>

</panelSuccess>


Design[edit]




Vegetation

For a detailed list of recommend plant species, see Plants for bioretention

  • The vegetation is a big opportunity to maximize the co-benefits of biodiversity and amenity. Planting plans can be formalized or naturalized to suit the surrounding style.
  • For resilient and robust planting, native species which can tolerate periods of drought and periodic inundation are recommended.
  • Woody and evergreen plants should be avoided in any areas of the bioretention cell to be used as snow storage.
  • Dense shrubby plants should be avoided in locations where the accumultion of trash is anticipated as a maintenance problem.

<panelSuccess>

</panelSuccess>


Performance[edit]

Performance Content

<panelSuccess>

</panelSuccess>


Incentives and Credits[edit]

In Ontario

City of Mississauga
The City of Mississauga has a stormwater management credit program which includes RWH as one of their recommended site strategies[1].

LEED BD + C v. 4

SITES v.2


See Also[edit]


External Links[edit]

[edit]

Variations

Overview

Design Guidance

BMP Sizing

Design Specifications

Construction Considerations

Inspection and Maintenance Needs

Life Cycle Costs

Case Studies

Typical Design Drawings

Supporting Material and External Resources




  SEND US YOUR QUESTIONS & FEEDBACK ABOUT THIS PAGE