Line 1: |
Line 1: |
− | These sizing equations are suggested for use in calculating the capacity of swales which have a larger proportion of surface flow. i.e. grass swales, rather than [[bioswales]]. | + | These sizing equations are suggested for use in calculating the capacity of swales which have a larger proportion of surface flow. i.e. grass swales, rather than [[bioswales]]. <br> |
− | | + | In many cases the length of swale required will exceed the available space, so that an underground [[infiltration trenches|infiltration trench]] or a [[Dry ponds| dry pond]] will be a preferred solution. |
| | | |
| ===Triangular channel=== | | ===Triangular channel=== |
Line 11: |
Line 11: |
| <math>L=\frac{360,000Q_{p}}{\left\{ b+2.388\left[\frac{Q_{p}n}{\left(2\sqrt{1+m^{2}-m}\right)S^{\frac{1}{2}}}\right ]^{\frac{3}{8}}\sqrt{1+m^{2}} \right \}q}</math> | | <math>L=\frac{360,000Q_{p}}{\left\{ b+2.388\left[\frac{Q_{p}n}{\left(2\sqrt{1+m^{2}-m}\right)S^{\frac{1}{2}}}\right ]^{\frac{3}{8}}\sqrt{1+m^{2}} \right \}q}</math> |
| | | |
− | {Plainlist|1=Where: | + | {{Plainlist|1=Where: |
− | *L = length of swale in m | + | *''L'' = length of swale in m |
− | *Q<sub>p</sub> = peak flow of the storm to be controlled, in m<sup>3</sup>/s | + | *''Q<sub>p</sub>'' = peak flow of the storm to be controlled, in m<sup>3</sup>/s |
− | *m = swale side slope (dimensionless) | + | *''m'' = swale side slope (m/m) |
− | *S = the longitudinal slope (dimensionless) | + | *''S'' = the longitudinal slope (m/m) |
− | *n = Manning's coefficeint (dimensionless) | + | *''n'' = Manning's coefficient (dimensionless) |
− | *b = bottom width of trapezoidal swale, in m.} | + | *''b'' = bottom width of trapezoidal swale, in m.}} |
− | | |
− | | |
− | | |
− | | |
| | | |
| | | |
| | | |
− | [[category:modeling]] | + | ---- |
| + | [[Category:Infiltration]] |
| + | [[Category:Green infrastructure]] |
| + | [[Category:Modeling]] |