Clogging

From LID SWM Planning and Design Guide
Revision as of 15:26, 18 October 2018 by Jenny Hill (talk | contribs)
Jump to navigation Jump to search

Grates[edit]

Geotextiles/filter fabric[edit]

Laboratory research has demonstrated that the performance and clogging of maturing filter fabric can be predicted mathematically, based upon the media/filter material particle size distribution [1]. Elsewhere the mechanisms behind the clogging have been studied and characterised using CT-scanning technology [2].


[3] [4] [5] [6]



Filter media[edit]

Salty water has been shown to cause degradation of the filter media, and subsequent loss of the initial text and flow conditions [7]

  1. ↑ Palmeira, E. M. and Trejos Galvis, H. L. (2016). Opening sizes and filtration behaviour of non-woven geotextiles under confined and partial clogging conditions. Geosynthetics International. [1]
  2. ↑ Miszkowska, A., S. Lenart, and E. Koda. 2017. Changes of Permeability of Nonwoven Geotextiles due to Clogging and Cyclic Water Flow in Laboratory Conditions. Water 9(660). doi:10.3390/w9090660.
  3. ↑ Upstate Forever. 2005. Bioretention - LID fact sheet. Greenville, South Carolina.
  4. ↑ Tahvonen, O. 2018. Adapting Bioretention Construction Details to Local Practices in Finland. Sustainability 10(276). doi: doi:10.3390/su10020276.
  5. ↑ Miszkowska, A., S. Lenart, and E. Koda. 2017. Changes of Permeability of NonwovenGeotextiles due to Clogging and Cyclic Water Flow in Laboratory Conditions. Water 9(660). doi:10.3390/w9090660.
  6. ↑ McLemore, A.J., J.R. Vogel, and S. Taghvaeian. 2017. Bioretention Cell Design Guidance for Oklahoma.
  7. ↑ Kakuturu, S.P., and S.E. Clark. 2015. Clogging Mechanism of Stormwater Filter Media by NaCl as a Deicing Salt. doi: 10.1089/ees.2014.0337. [2]

The engineered soil component of bioretention cell or dry swale designs, typically with a high rate of infiltration and designed to retain contaminants through filtration and adsorption to particles.

The engineered soil component of bioretention cell or dry swale designs, typically with a high rate of infiltration and designed to retain contaminants through filtration and adsorption to particles.

The technique of removing pollutants from runoff as it infiltrates through the soil.

A shallow excavated surface depression containing prepared filter media, mulch, and planted with selected vegetation.

Low Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting.

Retrieved from "https://wiki.sustainabletechnologies.ca/index.php?title=Clogging&oldid=8948"