Pollution prevention

From LID SWM Planning and Design Guide
Revision as of 20:17, 15 December 2017 by Kyle menken (talk | contribs) (Created page with "When assessing LID options on your site, identifying pollution threats is an important part of the pre-design process. Applying the principles of pollution prevention, -- the...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

When assessing LID options on your site, identifying pollution threats is an important part of the pre-design process. Applying the principles of pollution prevention, -- the use of processes, practices, materials, products, substances or energy that avoid or minimize the creation of pollutants and waste, and reduce the overall risk to the environment and human health -- can help eliminate those pollution threats, ensure compliance with regulations and bylaws, and create a safer environment for staff and customers.

P2 is about anticipating and preventing pollution instead of reacting to it after a spill or release has occurred. It is part of an ongoing pollution management approach that is comprised of prevention, control and clean-up.

P2 opportunities can be found throughout any site or operation. For instance, installing different equipment or technology, or changing raw materials or staff routines can result in pollution prevention.


The ways in which P2 is achieved varies from one sector to another, but typically there are nine common opportunities:

Dumpster management[edit]

Dumpsters can be a major source of pollution that can affect water quality. When dumpster lids are left open rainwater is able to mix with the trash, resulting in a leaking fluid, or “dumpster juice” that can contain toxic organic and inorganic materials. If not treated, this dumpster juice can enter the storm drain system, contributing to poor water quality.

Grease management[edit]

Restaurants produce grease and other wastes as a by-product of normal food preparation. If grease is dumped or washed into sewers or storm drains, it can cause sanitary sewer overflows or stormwater runoff pollution. Restaurants can implement simple and low-cost P2 practices and train workers to properly dispose of used waste.

Parking lot maintenance[edit]

Maintenance operations have the potential to pollute stormwater runoff if sensible P2 practices are not employed. This is particularly true of power washing, which can deliver sediment, nutrients, hydrocarbons, and other pollutants to the storm drain system.

Building maintenance[edit]

Some building maintenance practices produce polluted wash water that can directly enter the storm drain system during dry weather, whereas others deposit fine particles or liquids that can wash away into stormsewers during wet weather. ==Landscaping and grounds care == Landscaping services are generally performed by a lawn care/ landscaping contractor or an in-house maintenance crew. Poor landscaping practices can create stormwater pollution, particularly in urban areas where soils are compacted.

Outdoor storage[edit]

The risk of stormwater pollution is greatest for operations that store large quantities of liquids or bulk materials at sites that are connected to the storm drain system. Protecting outdoor storage areas is a simple and effective P2 practice. ==Vehicle maintenance and repair == Often, vehicles that are wrecked or awaiting repair can be a concern if leaking fluids are exposed to stormwater runoff. Vehicle