Swales: TTT
Revision as of 01:12, 6 September 2017 by Jenny Hill (talk | contribs)
Name | User-assigned swale name |
Upstream Node | Name of node on the inlet end of the swale (which is normally the end at higher elevation) |
Downstream Node | Name of node on the outlet end of the swale (which is normally the end at lower elevation) |
Length (m) | Length of the swale |
Manning's Roughness | Manning's roughness coefficient |
Upstream Invert Offset (m) | Depth of swale invert above node invert at inlet end of the swale |
Downstream Invert Offset (m) | Depth or elevation of the swale invert above the node invert at the outlet end of the swale |
Depth (m) | Depth of the swale |
Bottom Width (m) | Bottom width of the trapezoidal swale (i.e., open channel) For a triangular channel, enter 0 |
Left Side Slope (m/m) | Left side slope (run/rise) |
Right Side Slope (m/m) | Right side slope (run/rise) |
Seepage (mm/hour) | Rate of seepage loss into the surrounding soil |