Salt

Site Planning

Recommended planning strategies in designing sites for reduced salt usage:

Effective grading

Areas for vehicular and pedestrian traffic should be graded between 2 - 4% to reduce the chances of depressions forming. (maximum permitted 5% for AODA)

• Sub bases should be well compacted for the same reason. Preventing ponding and ice formation reduces the salting requirements for those surfaces.
• In winter months efficient salt application should be made along the top of slopes. Melting snow will carry the salt solution down-gradient.

Snow Piles

Storage locations for snow piles should be in sunny areas with low traffic. Consider grading the storage location to distribute the melt-water as sheet flow over a grass filter strip into an adjacent BMP, such as a bioretention cell or infiltration trench. In some cases, with careful vegetation selection and adequate drainage, the BMP itself can serve as a snow storage location. Snow storage areas should be clearly marked for seasonal maintenance staff.

Sidewalk Design and Pedestrian Flow

Sidewalks which receive infrequent use could be closed for the winter season. Maintained sidewalks should be ≥ 1.5 m wide to accommodate plowing and minimise the salting required. Using textured pavers can improve grip for pedestrians, again reducing the salt required. In busy areas around building entrances, covered walkways and heated mats also reduce salt requirements.

Trees

Specifying deciduous trees will maximise winter sunlight penetration. This will naturally enhance the melting of frozen surfaces, limiting the need to winter maintenance.

Other vegetation

Vegetation varies in its reaction to soils with high salinity:

• Salt in soil water generally makes it more difficult for roots to take up water. This phenomenon mimics drought conditions for the plant.
• If passing traffic sprays salty water onto plants it can reduce cold hardiness in buds and new twigs. These then become more susceptible to freezing, mortality or deformation.
• In high enough concentrations sodium and chloride can also be directly toxic to plants. In some species the ions are absorbed by the plant and build up in the leaves causing them to die.

Generally, the vegetation growing closest to the source will be most strongly affected by salt. Plants actively growing in late winter (when salt levels are highest) are also more significantly affected. So, warm season grasses offer an advantage over cool season grasses, because they emerge later in the spring when excess salt has been flushed away. Resilient turf grasses are particularly useful in the design of vegetated filter strips, dry ponds and enhanced grass swales. The Ministry of Transportation have standardized a number of grass mixes. The 'Salt Tolerant Mix' is of particular value for low impact development applications alongside asphalt roadways and paved walkways.

Canada #1 Ground Cover (salt tolerant mix)

Common name	Scientific name	Proportion
Tall Fescue	Festuca arundinacea	25 %
Fults Alkali Grass	Puccinellia distans	20 %
Creeping Red Fescue	Festuca rubra	25 %
Perennial ryegrass	Lolium perrenne	20 %
Hard Fescue	Festuca trachyphylla	10 %

External links

• Smart about Salt

---

Best management practice. State of the art methods or techniques used to manage the quantity and improve the quality of wet weather flow. BMPs include: source, conveyance and end-of-pipe controls.

Natural or artificial means of intercepting and removing surface or subsurface water (usually by gravity).

A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting.

A mixture of mineral aggregates bound with bituminous materials, used in the construction and maintenance of paved surfaces.