Difference between revisions of "Aggregates"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
m
m
Line 9: Line 9:
 
The important characteristics of the stone within the reservoir or [[underdrain]] are the lack of fines, the void ratio and (to a lesser extent) the permeability.  
 
The important characteristics of the stone within the reservoir or [[underdrain]] are the lack of fines, the void ratio and (to a lesser extent) the permeability.  
 
Porosity and permeability are directly influenced by the size, gradation and angularity of the particles <ref>Judge, Aaron, "Measurement of the Hydraulic Conductivity of Gravels Using a Laboratory Permeameter and Silty Sands Using Field Testing with Observation Wells" (2013). Dissertations. 746. http://scholarworks.umass.edu/open_access_dissertations/746</ref>
 
Porosity and permeability are directly influenced by the size, gradation and angularity of the particles <ref>Judge, Aaron, "Measurement of the Hydraulic Conductivity of Gravels Using a Laboratory Permeameter and Silty Sands Using Field Testing with Observation Wells" (2013). Dissertations. 746. http://scholarworks.umass.edu/open_access_dissertations/746</ref>
 +
 +
 +
==Stone for erosion control==
 +
 +
Aggregates used to line [[swales]] or otherwise dissipate energy (e.g. in [[forebays]])should have high angularity to increase the permissible shear stress applied by the flow of water. However, in some surface landscaped applications there may be a desire to use a rounded aggregate such as 'river rock' for aesthetic reasons.

Revision as of 18:03, 23 January 2018

Reservoir Stone[edit]

The highest void ratio is found in uniformly graded aggregate, as there are no smaller particles to occupy the inter-particle pores.
Higher permeability is found in larger, angular, uniformly graded aggregate. This is due to larger pore sizes and lower tortuosity.

The important characteristics of the stone within the reservoir or underdrain are the lack of fines, the void ratio and (to a lesser extent) the permeability. Porosity and permeability are directly influenced by the size, gradation and angularity of the particles [1]


Stone for erosion control[edit]

Aggregates used to line swales or otherwise dissipate energy (e.g. in forebays)should have high angularity to increase the permissible shear stress applied by the flow of water. However, in some surface landscaped applications there may be a desire to use a rounded aggregate such as 'river rock' for aesthetic reasons.

  1. ↑ Judge, Aaron, "Measurement of the Hydraulic Conductivity of Gravels Using a Laboratory Permeameter and Silty Sands Using Field Testing with Observation Wells" (2013). Dissertations. 746. http://scholarworks.umass.edu/open_access_dissertations/746

The void ratio (e) of a mixture is the ratio of the volume of void-space to the volume of solids. It is closely related to the concept of porosity (n) where porosity is the ratio of the volume of void-space to the total or bulk volume of the mixture. e = Volume of voids/Volume of solids = n/(1-n)

A broad category of particulate material used in construction, including sand, gravel, crushed stone, slag, recycled concrete and geosynthetic aggregates, and available in various particulate size gradations.

Soil particles with a diameter less than 0.050 mm.

The porosity (n) of a mixture is the ratio of the volume of void-space to the total or bulk volume of the mixture. It is closely related to the concept of void ratio (e) where void ratio is the ratio of the volume of void-space to the volume of solids. n = Volume of voids/Total volume of mixture = e/(1+e)

Includes the protection of soil from dislocation by water, wind or other agents.

A broad category of particulate material used in construction, including sand, gravel, crushed stone, slag, recycled concrete and geosynthetic aggregates, and available in various particulate size gradations.

Retrieved from "https://wiki.sustainabletechnologies.ca/index.php?title=Aggregates&oldid=6380"