Difference between revisions of "Notation"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
Line 1: Line 1:
 +
 +
;f
 +
:Eh?
 +
 
;L
 
;L
 
:Length, e.g. of a reach, channel or swale (usually in m)
 
:Length, e.g. of a reach, channel or swale (usually in m)
Line 16: Line 20:
 
;R<sub>b</sub>  
 
;R<sub>b</sub>  
 
:Rise of compensation gradient for an enhanced swale (length, usually m)
 
:Rise of compensation gradient for an enhanced swale (length, usually m)
 +
 +
;S
 +
:Slope
  
 
;SCF
 
;SCF

Revision as of 19:12, 27 September 2017

f
Eh?
L
Length, e.g. of a reach, channel or swale (usually in m)
m
run of side slopes in channel cross sections (length, but usually expressed as a ratio in relation to rise. e.g. where side side slopes = 1:3.5, m = 3.5)
q
infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?)
Qp
Peak flow in units of volume per time (e.g. m3/s)
Ra
Existing rise of swale gradient (length, usually m)
Rb
Rise of compensation gradient for an enhanced swale (length, usually m)
S
Slope
SCF
Safety correction factor (dimensionless)
y
Depth of water (length, usually m or sometimes mm)