Difference between revisions of "Notation"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) |
Jenny Hill (talk | contribs) |
||
Line 1: | Line 1: | ||
+ | ;L | ||
+ | :Length, e.g. of a reach, channel or swale (usually in m) | ||
+ | |||
;m | ;m | ||
:run of side slopes in channel cross sections (length, but usually expressed as a ratio in relation to rise. e.g. where side side slopes = 1:3.5, m = 3.5) | :run of side slopes in channel cross sections (length, but usually expressed as a ratio in relation to rise. e.g. where side side slopes = 1:3.5, m = 3.5) | ||
Line 13: | Line 16: | ||
;SCF | ;SCF | ||
:Safety correction factor (dimensionless) | :Safety correction factor (dimensionless) | ||
+ | |||
+ | ;y | ||
+ | :Depth of water (length, usually m or sometimes mm) |
Revision as of 19:10, 27 September 2017
- L
- Length, e.g. of a reach, channel or swale (usually in m)
- m
- run of side slopes in channel cross sections (length, but usually expressed as a ratio in relation to rise. e.g. where side side slopes = 1:3.5, m = 3.5)
- q
- infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?)
- Ra
- Existing rise of swale gradient (length, usually m)
- Rb
- Rise of compensation gradient for an enhanced swale (length, usually m)
- SCF
- Safety correction factor (dimensionless)
- y
- Depth of water (length, usually m or sometimes mm)