| − | [[File:Screenshot 2025-11-12 162221.png|400px|thumb|right|Rolled erosion control products (RECP) should be installed according to manufacturuer instructions. In general, RECP on steep slopes should be installed down the slope, extend to the top of the slope, use an anchor trench at top and bottom, be in continuous contact with soil surface and overlap. RECP installed in ditches/channels should be installed parallel to flow direction, be anchored to top of slope on both sides, be in continuous contact with soil surface, and overlap. Air pockets between the RECP and soil will allow stormwater to pass through and erode the soil below. | + | [[File:Screenshot 2025-11-12 162221.png|400px|thumb|right|Rolled erosion control products (RECP) should be installed according to manufacturer instructions. In general, RECP on steep slopes should be installed down the slope, extend to the top of the slope, use an anchor trench at top and bottom, be in continuous contact with soil surface and overlap. RECP installed in ditches/channels should be installed parallel to flow direction, be anchored to top of slope on both sides, be in continuous contact with soil surface, and overlap. Air pockets between the RECP and soil will allow stormwater to pass through and erode the soil below. |