Difference between revisions of "Safety correction factors"

Latest revision as of 18:17, 1 October 2018

Redirect to:

@@ Line 1: / Line 1: @@
-{|class="wikitable"
+#REDIRECT [[Design infiltration rate]]
-|+ Safety correction factors for calculating design infiltration rates<ref>Wisconsin Department of Natural Resources. 2004. Conservation Practice Standards. Site Evaluation for Stormwater Infiltration (1002). Madison, WI.</ref>
-|-
-!Ratio of Mean Measured Infiltration Rates
-!Safety Correction Factor
-|-
-|≤ 1
-|2.5
-|-
-|1.1 to 4.0
-|3.5
-|-
-|4.1 to 8.0
-|4.5
-|-
-|8.1 to 16.0
-|6.5
-|-
-|16.1 or greater
-|8.5
-|}
-<math>q'=\frac{q}{SCF}</math>