Difference between revisions of "Reservoir aggregate"
Jenny Hill (talk | contribs) m (Jenny Hill moved page Reservoir gravel to Reservoir aggregate) |
Jenny Hill (talk | contribs) m |
||
| Line 10: | Line 10: | ||
*Maximum abrasion of 10% for 100 revolutions and maximum of 50% for 500 revolutions | *Maximum abrasion of 10% for 100 revolutions and maximum of 50% for 500 revolutions | ||
| + | Standard specifications for the gradation of aggregates are maintained by ASTM [https://www.astm.org/Standards/D2940.htm ASTM D 2940]. | ||
---- | ---- | ||
[[category:materials]] | [[category:materials]] | ||
Revision as of 20:36, 5 March 2018
For advice on decorative surface aggregates see Stone
Gravel used for underdrains in bioretention, infiltration trenches and chambers, and exfiltration trenches should be 20 - 50 mm, uniformly-graded, clean (maximum wash loss of 0.5%), crushed angular stone that has a void ratio of 0.4[2].
The clean wash to prevent rapid accumulation of fines from the aggregate particles in the base of the reservoir. The uniform grading and the angularity are important to maintain pore throats and clear voids between particles. (i.e. achieve the void ratio). Porosity and permeability are directly influenced by the size, gradation and angularity of the particles [1]
Gravel with structural requirements should also meet the following criteria:
- Minimum durability index of 35
- Maximum abrasion of 10% for 100 revolutions and maximum of 50% for 500 revolutions
Standard specifications for the gradation of aggregates are maintained by ASTM ASTM D 2940.
- ↑ 1.0 1.1 1.2 Judge, Aaron, "Measurement of the Hydraulic Conductivity of Gravels Using a Laboratory Permeameter and Silty Sands Using Field Testing with Observation Wells" (2013). Dissertations. 746. http://scholarworks.umass.edu/open_access_dissertations/746
- ↑ Porosity of Structural Backfill, Tech Sheet #1, Stormtech, Nov 2012, http://www.stormtech.com/download_files/pdf/techsheet1.pdf accessed 16 October 2017