Difference between revisions of "Screening LID options"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
Line 29: Line 29:
 
* Natural Heritage Systems or green infrastructure
 
* Natural Heritage Systems or green infrastructure
  
=== Screen LID Options ===
+
=== Screen Potential LID Options ===
 +
 
 +
A number of factors need to be considered when screening the suitability of a given
 +
 
 +
location within a development site for application of stormwater BMPs. Table 3.4.1
 +
 
 +
summarizes site constraints associated with some general types of structural LID
 +
 
 +
practices for stormwater management that should be considered. Further
 +
 
 +
information regarding constraints to the design of various end-of-pipe BMPs can be
 +
 
 +
found in the Ontario Ministry of the Environment Stormwater Management Planning and
 +
 
 +
Design Manual (2003). The use of LID BMPs should be considered first to meet the
 +
 
 +
design criteria before the use of end-of-pipe BMPs.
 +
 
  
 
==== Structural Requirements or Site Constraints ====
 
==== Structural Requirements or Site Constraints ====

Revision as of 20:00, 12 September 2017

Process for selecting a suite of LID Options[edit]

Process Diagram for Screening LID Options

Site Conditions[edit]

Define Design Criteria[edit]

A detailed description of the design criteria that need to be defined is provided in the

respective CVC and TRCA Stormwater Management Criteria documents. If outside jurisdictional

boundaries, criteria developed should have requirements to:


  • preserve groundwater and baseflow characteristics;
  • prevent undesirable and costly geomorphic changes in the watercourse;
  • prevent any increases in flood risk potential;
  • protect water quality; and ultimately,
  • maintain an appropriate diversity of aquatic life and opportunities for human uses


The design criteria required to protect, enhance or restore the environmental resources

can be grouped under the following five categories.

  • Flood Protection;
  • Water Quality;
  • Erosion Control;
  • Recharge; and
  • Natural Heritage Systems or green infrastructure

Screen Potential LID Options[edit]

A number of factors need to be considered when screening the suitability of a given

location within a development site for application of stormwater BMPs. Table 3.4.1

summarizes site constraints associated with some general types of structural LID

practices for stormwater management that should be considered. Further

information regarding constraints to the design of various end-of-pipe BMPs can be

found in the Ontario Ministry of the Environment Stormwater Management Planning and

Design Manual (2003). The use of LID BMPs should be considered first to meet the

design criteria before the use of end-of-pipe BMPs.


Structural Requirements or Site Constraints[edit]

Performance Requirements[edit]

Operations and Maintenance Requirements[edit]

Life Cycle Costing Requirements[edit]

Select LIDs (Conceptual Design)[edit]

Assess Effectiveness[edit]

Meets Design Criteria[edit]

Proceed to Detailed Design[edit]