Winter Management

Salt and Snow

Sodium and chloride ions in de-icing salts applied to asphalt areas travel easily with the runoff water. De-icing salt can also increase the mobility of some heavy metals in soil (e.g. lead, copper or cadmium). This may increase the downstream concentration of these metals (Amrhein et al., 1992; Bauske and Goetz, 1993).

Very few studies have sampled groundwater below infiltration facilities or roadside ditches receiving de-icing salt laden runoff have found concentrations of heavy metals that exceed drinking water standards (e.g., Howard and Beck, 1993; Granato et al., 1995).

To minimize risk of groundwater or soil contamination, the following management approaches are recommended (Pitt et al., 1999; TRCA, 2009b):

1. Stormwater infiltration practices should not receive runoff from the following areas:
   • Where large amounts of de-icing salts are applied (e.g., busy highways), or
   • Pollution hot spots (e.g. vehicle fuelling, servicing or demolition areas, outdoor storage or handling areas for hazardous materials, and some heavy industry sites);
2. Prioritize infiltration of runoff from source areas that are comparatively less contaminated such as roofs, low traffic roads and parking areas; and
3. Apply pre-treatment practices before infiltration of road or parking area runoff.

Planning

Recommended planning strategies in designing sites for reduced salt usage:

Effective Grading Areas for vehicular and pedestrian traffic should be graded between 2 - 4% to reduce the chances of depressions forming. Sub bases should be well compacted for the same reason. Reducing the chances of ponding and ice formation reduces the salting requirements for those surfaces.

Snow Piles Storage locations for snow piles should be in sunny areas with low traffic. Consider grading the storage location to distribute the meltwater as sheet flow over a grass filter strip into an adjacent BMP, such as a bioretention cell or infiltration trench.

Sidewalk Design and Pedestrian Flow Sidewalks which receive infrequent use could be closed for the winter season. Maintained sidewalks should be ≥ 1.5 m wide to accommodate plowing and minimize the salting required. Using textured pavers can improve grip for pedestrians, again reducing the salt required. Check that these are compatible with plowing.

Trees Specifying deciduous trees will maximize winter sunlight penetration. This will naturally enhance the melting of frozen surfaces, limiting the need to winter maintenance.

Vegetation

Vegetation varies in its reaction to salt-affected soils.

• Salt in soil water generally makes it more difficult for roots to take up water. This phenomenon mimics drought conditions for the plant.
• If passing traffic sprays salty water onto plants it can reduce cold hardiness in buds and new twigs. These then become more susceptible to freezing, mortality or deformation.
• In high enough concentrations sodium and chloride can also be directly toxic to plants. In some species the ions are absorbed by t he plant and build up in the leaves causing them to die

Generally, the vegetation growing closest to the source will be most strongly affected by salt. Plants actively growing in late winter (when salt levels are highest) are also more significantly affected. So, warm season grasses offer an advantage over cool season grasses, because they emerge later in the spring when excess salt has been flushed away.

<panelSuccess>

• 

  Snow being stored on a filter strip in Markham, ON

</panelSuccess>

---

Freezing and Expansion

Freezing temperatures can cause problems with pipes and cisterns exposed above the frost penetration line[1]. This maybe a significant issue for rainwater harvesting systems, including residential rain barrels.

IMAGES?

---

See Also

• Water Quality

---

SEND US YOUR QUESTIONS & FEEDBACK ABOUT THIS PAGE

A mixture of mineral aggregates bound with bituminous materials, used in the construction and maintenance of paved surfaces.

The portion of water precipitated onto a catchment area, which then flows as surface discharge from the catchment area past a specified point.

Water from rain, snow melt, or irrigation that flows over the land surface.

Toronto and Region Conservation Authority

Best management practice. State of the art methods or techniques used to manage the quantity and improve the quality of wet weather flow. BMPs include: source, conveyance and end-of-pipe controls.

a gently sloping, densely vegetated areas that treat runoff as sheet flow from adjacent impervious areas. They function by slowing runoff velocity and filtering out suspended sediment and associated pollutants, and by providing some infiltration into underlying soils.

Tank used to store rainwater (typically roof runoff) for later use.