8,255
edits
Changes
Jump to navigation
Jump to search
Line 12:
Line 12: + + Line 22:
Line 24: − + + + − + − + − +
no edit summary
{| class="wikitable"
{| class="wikitable"
|+A 'swale' as a conveyance element in the TTT (key parameters)
|+A 'swale' as a conveyance element in the TTT (key parameters)
|-
!colspan = "2" style="background: darkcyan; color: white; align = center"|General Info
|-
|-
|Upstream Node||Name of node on the inlet end of the swale (higher elevation)
|Upstream Node||Name of node on the inlet end of the swale (higher elevation)
Suggested range for mown grass (dependent on density) 0.03 – 0.06 <ref name = SWMM> Oregon State Univ., Corvallis. Dept. of Civil, Construction and Environmental Engineering.; Environmental Protection Agency, Cincinnati ONRMRL. Storm Water Management Model Reference Manual Volume I Hydrology (Revised). 2016:233.https://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=P100NYRA.txt Accessed August 23, 2017.</ref>
Suggested range for mown grass (dependent on density) 0.03 – 0.06 <ref name = SWMM> Oregon State Univ., Corvallis. Dept. of Civil, Construction and Environmental Engineering.; Environmental Protection Agency, Cincinnati ONRMRL. Storm Water Management Model Reference Manual Volume I Hydrology (Revised). 2016:233.https://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=P100NYRA.txt Accessed August 23, 2017.</ref>
|-
|-
|Upstream Invert Offset (m)||Depth of swale invert above node invert at inlet end of the swale
|Upstream Invert (m)||Depth of swale invert above node invert at inlet end of the swale
|-
|Downstream Invert (m)||Depth or elevation of the swale invert above the node invert at the outlet end of the swale
|-
|-
|Downstream Invert Offset (m)||Depth or elevation of the swale invert above the node invert at the outlet end of the swale
!colspan = "2" style="background: darkcyan; color: white; align = center"|General Info
|-
|-
|Depth (m)||Depth of the swale
|Maximum Depth (m)||Depth of the swale
|-
|-
|Bottom Width (m)||Bottom width of the trapezoidal swale (i.e., open channel)<br> For a triangular channel, enter 0
|Bottom Width (m)||Bottom width of the trapezoidal swale<br> For a triangular channel, enter 0
|-
|-
|Left Side Slope (m/m)||Left side slope (run/rise). Suggested value of 3 or 4 if design permits. [[Enhanced swales]]
|Left Side Slope (m/m)||Left side slope (run/rise). Suggested value of 3 or 4 if design permits. [[Enhanced swales]]