8,255
edits
Changes
Jump to navigation
Jump to search
mLine 17:
Line 17: − + Line 44:
Line 44: − + Line 50:
Line 50: −
no edit summary
|-
|-
|Manning's Roughness||Lower numbers indicate less surface obstruction and result in faster flow. <br>
|Manning's Roughness||Lower numbers indicate less surface obstruction and result in faster flow. <br>
Suggested range for [[Turf: List|mown grass]] (dependent on density) 0.03 – 0.06 <ref name = SWMM> Oregon State Univ., Corvallis. Dept. of Civil, Construction and Environmental Engineering.; Environmental Protection Agency, Cincinnati ONRMRL. Storm Water Management Model Reference Manual Volume I Hydrology (Revised). 2016:233.https://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=P100NYRA.txt Accessed August 23, 2017.</ref>
Suggested range for [[Turf|mown grass]] (dependent on density) 0.03 – 0.06 <ref name = SWMM> Oregon State Univ., Corvallis. Dept. of Civil, Construction and Environmental Engineering.; Environmental Protection Agency, Cincinnati ONRMRL. Storm Water Management Model Reference Manual Volume I Hydrology (Revised). 2016:233.https://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=P100NYRA.txt Accessed August 23, 2017.</ref>
|-
|-
|Upstream Invert (m)||Depth of swale invert above node invert at inlet end of the swale
|Upstream Invert (m)||Depth of swale invert above node invert at inlet end of the swale
|-
|-
|Surface roughness (Manning’s n)||Lower numbers indicate less surface obstruction and result in faster flow. <br>
|Surface roughness (Manning’s n)||Lower numbers indicate less surface obstruction and result in faster flow. <br>
Suggested range for [[Turf: List|mown grass]] (dependent on density) 0.03 – 0.06 <ref name = SWMM> Oregon State Univ., Corvallis. Dept. of Civil, Construction and Environmental Engineering.; Environmental Protection Agency, Cincinnati ONRMRL. Storm Water Management Model Reference Manual Volume I Hydrology (Revised). 2016:233.https://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=P100NYRA.txt Accessed August 23, 2017.</ref>
Suggested range for [[Turf|mown grass]] (dependent on density) 0.03 – 0.06 <ref name = SWMM> Oregon State Univ., Corvallis. Dept. of Civil, Construction and Environmental Engineering.; Environmental Protection Agency, Cincinnati ONRMRL. Storm Water Management Model Reference Manual Volume I Hydrology (Revised). 2016:233.https://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=P100NYRA.txt Accessed August 23, 2017.</ref>
|-
|-
|Surface slope (%)||If the slope > 3%, use [[Check dams]] to create temporary ponding, increase infiltration, and slow flow to reduce erosion.
|Surface slope (%)||If the slope > 3%, use [[Check dams]] to create temporary ponding, increase infiltration, and slow flow to reduce erosion.
|Swale side slopes (run/rise)||[[Enhanced grass swales #Design|Suggested value of 3 or 4 if design permits.]]
|Swale side slopes (run/rise)||[[Enhanced grass swales #Design|Suggested value of 3 or 4 if design permits.]]
|}
|}
[[Category: modeling]]
[[Category: modeling]]