Stormwater planters

From LID SWM Planning and Design Guide
Revision as of 20:40, 6 March 2018 by Jenny Hill (talk | contribs)
Jump to navigation Jump to search
ShrubsShrubsPerennialsPerennialsGrassesGrassesForebaysOverflowOverflowMulchFilter mediaChoking layerReservoir
This is an image map of a stormwater planter, clicking on components will load the appropriate article.

Over subsurface infrastructure, soils prone to subsidence, or pollution hotspots, it may be necessary to prevent all infiltration. These BMPs can also be squeezed into tight urban spaces, adjacent to buildings and within the usual setbacks required for infiltrating facilities. Stormwater planters can also be used as a means of providing building-integrated LID by capturing a portion of the rainwater from the rooftop.

Performance[edit]

This performance related section is due to be updated throughout 2018 as STEP perform a literature review of all common LID performance metrics. Water quality [1] [2] [3]

Gallery[edit]


See Also[edit]



  1. Macnamara, J.; Derry, C. Pollution Removal Performance of Laboratory Simulations of Sydney’s Street Stormwater Biofilters. Water 2017, 9, 907.;doi:10.3390/w9110907
  2. Lucke, T., & Nichols, P. W. B. (2015). The pollution removal and stormwater reduction performance of street-side bioretention basins after ten years in operation. Science of The Total Environment, 536, 784–792. https://doi.org/10.1016/J.SCITOTENV.2015.07.142
  3. Macnamara, J.; Derry, C. Pollution Removal Performance of Laboratory Simulations of Sydney’s Street Stormwater Biofilters. Water 2017, 9, 907. doi:10.3390/w9110907