Difference between revisions of "LID opportunities at municipal facilities"

From LID SWM Planning and Design Guide
Jump to: navigation, search
m
m
Line 60: Line 60:
 
|style="text-align: left;" |Building || * || * || * || ** || ** || * || ** || o || o || **
 
|style="text-align: left;" |Building || * || * || * || ** || ** || * || ** || o || o || **
 
|}
 
|}
 
 
 
 
 
Large-scale projects require significantly more effort, budget,
 
and staff than small-scale projects. Large-scale LID retrofits
 
include:
 
* Bioretention
 
* Enhanced grass swales
 
* Bioswales
 
* Perforated pipe systems
 
* Permeable pavement
 
* Soakaways
 
* Infiltration chambers
 
* Rainwater harvesting (excluding rain barrels)
 
* Prefabricated modules
 
* Green roofs
 
 
Consider a large-scale project if your municipality or
 
department would like to be a leader in sustainability. Large-scale
 
projects are often highly visible and attract more public
 
attention. Large-scale projects may also be the only solution
 
to site-specific challenges. For example, if site infrastructure
 
is at risk as a result of urban flooding, LID practices that detain
 
large volumes of runoff and encourage infiltration are the
 
most viable LID options.
 
Before starting a large-scale retrofit project, consider the
 
following distinctions that set these retrofits apart from small-scale
 
projects.
 
 
===Integration with capital works programs===
 
 
Most large-scale LID retrofits must function with existing
 
site infrastructure, such as storm sewers, catch basins,
 
and pavement systems. The construction of large-scale
 
LID practices often requires these systems to be removed,
 
exposed, or replaced. The best time for this type of project to
 
occur is when an infrastructure replacement or rehabilitation
 
project is already planned.
 
 
When LID retrofits are worked into other construction
 
projects, such as parking lot repaving, or grading or drainage
 
improvements, there can be substantial cost savings.
 
Whether big or small, every municipality spends relatively
 
large sums of money and substantial time planning for
 
major capital projects. This includes redevelopment of public
 
building and spaces. Many communities who have undertaken
 
retrofits recognize that even if a relatively small portion of the
 
project funds goes towards LID retrofits, they can retrofit large
 
impervious surfaces and avoid new stormwater management
 
infrastructure projects17.
 
 
Municipal facility rehabilitation is typically forecast well in
 
advance of the project. Parking lot paving is typically worked
 
into municipal budgets based on expected life cycle and
 
observed wear. As such, funds may be set aside prior to
 
the project planning phases. Long-term forecast budgets
 
may also be available for site revitalizations or expansions.
 
These budget forecasts provide opportunities to compare the
 
capital and life-cycle costs and benefits of the conventional
 
construction project and LID retrofit.
 
  
 
[[Category:Planning]]
 
[[Category:Planning]]

Revision as of 17:57, 19 December 2017

Each distinct area of your site can be a source for runoffThat potion of the water precipitated onto a catchment area, which flows as surface discharge from the catchment area past a specified point.Water from rain, snow melt, or irrigation that flows over the land surface. (referred to as a ‘source areaThe land draining to a single reference point (usually a structural BMP); similar to a subwatershed, but on a smaller scale.’). Target these areas when introducing LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. in your municipal facility.

Targeting hard surfaces

Municipal facilities have large parking lots to accommodate public demand. Parking areas represent the most significant source of pollutant loadingThe total mass of a pollutant entering a waterbody over a defined time period.The net amount of something (e.g. chemical, such as phosphorus), calculated as the product of concentration and volume in a given time. Some BMPs significantly reduce loading of pollutants to the environment by reducing volume more so than concentration. from these sites and contribute significantly to increased runoffThat potion of the water precipitated onto a catchment area, which flows as surface discharge from the catchment area past a specified point.Water from rain, snow melt, or irrigation that flows over the land surface. rates in comparison to natural conditions. Parking lots include areas for parking, areas for driving, and islands or landscape planters used for calming traffic, directing vehicles and improving pedestrian safety.

LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. practices can be incorporated into all areas of a parking lot. You can use bioretention in parking lot islands and along the lot perimeter. Standard curbs with small cut-outs (called ‘curb cuts’) can allow water to easily enter biorentention practices while also preventing damage from cars.

Bioswales are excellent options in parking lot islands or along lot perimeters. Parking lots with existing perimeter ditching are ideal for bioswaleLinear bioretention cell designed to convey, treat and attenuate stormwater runoff. The engineered filter media soil mixture and vegetation slows the runoff water to allow sedimentation, filtration through the root zone, evapotranspiration, and infiltration into the underlying native soil. integration due to their extended continuous flow path.

Prefabricated modular infiltration chambers are gaining acceptance for their easy integration with parking lot functions. These subsurface systems are typically installed over a coarse granularGravel, or crushed stone of various size gradations (i.e., diameter), used in construction; void forming material used as bedding and runoff storage reservoirs and underdrains in stormwater infiltration practices. reservoir to provide storage and allow infiltration into native soils. Infiltration chambers under conventional asphaltA mixture of mineral aggregates bound with bituminous materials, used in the construction and maintenance of paved surfaces. system work well on sites where parking demand and other site uses do not allow space for a stormwater feature.

Stormwater planters beautify this building entrance. The entrance receives a lot of traffic during business hours, making it an ideal location for a high visibility LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. practice. (Source: Aquafor Beech)

Permeable paving is also an option in large municipal parking lots. Pervious concrete, permeable interlocking concrete pavers, and porous asphaltA mixture of mineral aggregates bound with bituminous materials, used in the construction and maintenance of paved surfaces. can detain stormwater and increase infiltrationThe slow movement of water into or through a soil or drainage system.Penetration of water through the ground surface..

Municipal facilities provide excellent opportunities for integrating rainwater harvesting systems. Rainwater harvestingThe practice of intercepting, conveying and storing rainwater for future use. Captured rainwater is typically used for outdoor non-potable water uses such as irrigation, or in the building to flush toilets. systems have two requirements: an area for catchmentThe land draining to a single reference point (usually a structural BMP); similar to a subwatershed, but on a smaller scale. of relatively clean runoffThat potion of the water precipitated onto a catchment area, which flows as surface discharge from the catchment area past a specified point.Water from rain, snow melt, or irrigation that flows over the land surface. and a nearby demand for water usage. Municipal facilities often have large rooftop areas producing relatively clean runoffThat potion of the water precipitated onto a catchment area, which flows as surface discharge from the catchment area past a specified point.Water from rain, snow melt, or irrigation that flows over the land surface.. Installing a cisternTank used to store rainwater (typically roof runoff) for later use. internal to the building or buried adjacent to the building can provide a sustainable source of water for site irrigationHuman application of water to agricultural or recreational land for watering purposes. City of Toronto Wet Weather Flow Management November 2006 47 needs for landscaped areas, recreational fields and indoor use (e.g. flushing toilets and urinals).

Targeting highly visible areas

If your LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. integration strategy involves highly visible LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. practices, consider targeting areas with high-volume pedestrian traffic. This can help promote LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting.'s visibility among the public and increase support for future LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. projects.

Targeting pollution prevention opportunities

On some municipal sites, pollution prevention techniques and strategies outlined in Chapter 2 are the best approaches to mitigating the environmental impact of your site. Retrofits of municipal works yards require a different approach than other land uses discussed in this guide. Works yards do not offer substantial opportunities for public interaction. LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. retrofits should focus primarily on reducing pollution generated on-site. Fuelling stations, waste storage areas, truck washing stations, sandMineral particles which are smaller than 2 mm, and which are free of appreciable quantities of clay and silt. Coarse sand usually designates sand grains with particle size between 0.2 and 0.02 mm. and salt storage, staging areas and water conveyance features are ideal for pollution prevention.

Source areas

The best LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. option for your site will depend what source areas are present. Types of source areas include:

Source areas within a typical community centre.
  • Active use areas
  • Passive use areas
  • Pedestrian walkways
  • Internal driveways
  • Parking lots

On municipal sites, pollution prevention is often associated with changes to operations and maintenance practices and has not been included in the table below.

LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. opportunities in municipal buildings
(** = Common, * = Possible, o = Unusual)
Source areaThe land draining to a single reference point (usually a structural BMP); similar to a subwatershed, but on a smaller scale. Permeable pavement Bioretention Enhanced grass swales / bioswales Green roofs Soakaways and infiltration trenches Perforated pipe systems Rainwater harvesting Landscape alternatives Prefabricated modules Pollution prevention
Active use area ** ** ** o ** * o * o **
Passive use area o ** * o ** ** o ** ** **
Pedestrian walkway ** ** ** o ** * o * * **
Internal driveway ** ** ** o ** ** o o ** **
Parking lot ** ** ** o ** ** o o ** **
Building * * * ** ** * ** o o **