Changes

Jump to navigation Jump to search
m
Line 1: Line 1: −
__NOTOC__
+
[[File:Gravel_diagram.jpg|thumb| 75 mm drop from the impervious surface onto the gravel diaphragm]]
Gravel diaphragms are simply gravel filled trenches which act as inlet structures by redistributing concentrated flow to sheet flow: reducing the erosive power of the water and promoting infiltration. They also act as a pretreatment by settling out sediment particles before they reach any downstream structure or practice.
+
[[File:Gravel diaphragm.png|thumb|Note the fall from the impervious surface to the gravel surface]]
   −
{{TextBox|1=Gravel diaphragms are ideal for distributing flow and providing pretreatment for  
+
Gravel diaphragms are simply gravel filled trenches which act as [[inlet]] structures by redistributing concentrated flow to sheet flow: reducing the erosive power of the water and promoting [[infiltration]]. They also act as a [[pretreatment]] by settling out sediment particles before they reach any downstream structure or practice.
 +
 
 +
If the contributing drainage area is solely turf (e.g., sports field), then the gravel diaphragms may be eliminated from the treatment train.
 +
{{textbox|Gravel diaphragms are ideal for distributing flow and providing pretreatment for  
 
*[[Bioretention cells]]  
 
*[[Bioretention cells]]  
 
*[[Bioswales]]
 
*[[Bioswales]]
*[[Enhanced grass swales]]
+
*[[Enhanced swales]]
 
*[[Vegetated filter strips]]}}
 
*[[Vegetated filter strips]]}}
----
+
 
===Planning considerations===
+
==Planning==
 +
The gravel diaphragm serves two purposes. First, it acts as a pretreatment device, settling out coarse particles before they reach an [[infiltration]] practice. Second, it acts as a [[level spreader]], maintaining sheet flow as runoff flows over the filter strip. If the contributing drainage area is steep, then larger stone should be used in the diaphragm,
 
*Diaphragms can be designed along curves as readily as straight lines,  
 
*Diaphragms can be designed along curves as readily as straight lines,  
 
*As they are not a conveyance practice, they should be designed along a single contour line, promoting the level spreading function,   
 
*As they are not a conveyance practice, they should be designed along a single contour line, promoting the level spreading function,   
*Flow should be directed into the device laterally,
+
*Flow should be directed into the device laterally.
----
+
 
===Design===
+
==Design==
 
*Where flow comes off an impervious surface, a drop of 75 mm or more to the surface level of the diaphragm is recommended,
 
*Where flow comes off an impervious surface, a drop of 75 mm or more to the surface level of the diaphragm is recommended,
 
*Typical dimensions for the trench excavation are 300 mm deep and 600 mm wide. The trench may be any length,  
 
*Typical dimensions for the trench excavation are 300 mm deep and 600 mm wide. The trench may be any length,  
 
*The trench should be lined with geotextile before filling with gravel,   
 
*The trench should be lined with geotextile before filling with gravel,   
*River rock or decorative aggregate may be included in a layer at the top of the gravel fill, for aesthetic value.  
+
*River rock or decorative [[stone]] may be included in a layer at the top of the gravel fill, for aesthetic value.
----
+
 
<div class="col-md-8">
+
==Materials==
===Materials===
+
===Gravel===
<h4>Gravel</h4>
+
The type of medium sized aggregates recommended for gravel diaphragms are described in [[choker layer]]. In some contexts it may be desirable to apply a surface layer of more decorative [[stone]].
{{:Pea gravel}}
+
 
<h4>Geotextile</h4>
+
===Geotextiles===
 
{{:Geotextiles}}
 
{{:Geotextiles}}
</div>
+
 
<div class="col-md-12">
+
==External Resources==
 +
*[http://vwrrc.vt.edu/swc/april_22_2010_update/DCR_BMP_Spec_No_2_SHEET_FLOW_Final_Draft_v1-8_04132010.htm VIRGINIA DCR STORMWATER DESIGN SPECIFICATION No. 2]
 +
*[https://directives.sc.egov.usda.gov/OpenNonWebContent.aspx?content=17751.wba National Engineering Handbook Part 628 Dams Chapter 45 Filter Diaphragms]
 
----
 
----
  −
===References===
  −
[http://vwrrc.vt.edu/swc/april_22_2010_update/DCR_BMP_Spec_No_2_SHEET_FLOW_Final_Draft_v1-8_04132010.htm|VIRGINIA DCR STORMWATER DESIGN SPECIFICATION No. 2]
  −
  −
{{:Feedback}}
   
[[category: pretreatment]]
 
[[category: pretreatment]]
8,255

edits

Navigation menu