Downspout disconnection

From LID SWM Planning and Design Guide
Revision as of 16:06, 5 June 2017 by Jenny Hill (talk | contribs)
Jump to: navigation, search

In many older urban centres, downspout disconnection program require that residents retroactively disconnect downspouts. This is due to older sewer systems being undersized for the combined flow of sanitary waste and stormwaterSurface runoff from at-grade surfaces, resulting from rain or snowmelt events.. New projects should consider remaining independent of the municipal sewer from the outset. This may involve employing series of small individual site LIDLow Impact Development. A stormwater management strategy that seeks to mitigate the impacts of increased urban runoff and stormwater pollution by managing it as close to its source as possible. It comprises a set of site design approaches and small scale stormwater management practices that promote the use of natural systems for infiltration and evapotranspiration, and rainwater harvesting. technologies, or combining flow from a few sites to a shared facility.

The Ontario Building Code requires that:
"Where downspouts are provided and are not connected to a sewer, extensions shall be provided to carry rainwater away from the building in a manner that will prevent soil erosion(1) The wearing away of the land surface by moving water, wind, ice or other geological agents, including such processes as gravitation creep; (2) Detachment and movement of soil or rock fragments by water, wind, ice or gravity (i.e. Accelerated, geological, gully, natural, rill, sheet, splash, or impact, etc).."[1]

<panelSuccess> Recommended strategies to capture downspout runoffThat potion of the water precipitated onto a catchment area, which flows as surface discharge from the catchment area past a specified point.Water from rain, snow melt, or irrigation that flows over the land surface. include:

</panelSuccess>


  SEND US YOUR FEEDBACK ABOUT THIS PAGE